Mechanical Music Digest  Archives
You Are Not Logged In Login/Get New Account
Please Log In. Accounts are free!
Logged In users are granted additional features including a more current version of the Archives and a simplified process for submitting articles.
Home Archives Calendar Gallery Store Links Info
MMD > Archives > January 2007 > 2007.01.04 > 13Prev  Next


Patching a Wind Motor
By Eric Shoemaker

Moistened greetings from the Pacific Northwest!  Erik York asks about
patching the wind motor on his 1924 Stroud (Pianola) Aeolian upright
with cotton cloth and tacky glue.  Glad you asked, Erik, I hope this
will help save you from a great deal of frustration.

At first glance this wind motor looks like a set of three bellows
(especially in grand pianos) but is actually six bellows.  They are
hinged at the center, with leather, like a teeter-totter.  This is why
(among many other reasons) the suggested patch-job is probably wasting
time: if the hinges are leaking it won't matter how airtight the cloth
is, the motor is still not going to run efficiently and therefore
continue to bog down and the piano will still be hard to pump.

The interior hinge of leather is usually still good enough to function
as a hinge but not an airtight seal.  Slathering "Tacky" glue over
whatever cloth is there plus another layer of whatever cloth on top of
that will only stiffen everything up, compounding the existing problem.

But let's suppose one were to try and patch anyway.  Maybe an acceptable
_temporary_ repair for a singular component such as the Tempo governor
or equalizer -- something that could be accessible from all sides.  But
that's not possible to do with the type of motor discussed here.  There
is no way to reach around each section without disassembling the outer
two bellows from the center pair.  If you do this, the rubber O-rings
between the sections will rip the cloth you're trying to patch!  Simply
stated, it would be far easier to recover everything than it would to
apply any sort of patch.

I'm willing to bet no one except the person that sold you the patching
materials will disagree.  Don't oil anything either, in case that was
suggested.  I hope it isn't the same person that has quoted you
$3800.00 to rebuild the pneumatic stack.  Be careful, Erik, and good
luck.

Eric J. Shoemaker
Wet City, Washington


(Message sent Thu 4 Jan 2007, 22:59:42 GMT, from time zone GMT.)

Key Words in Subject:  Motor, Patching, Wind

Home    Archives    Calendar    Gallery    Store    Links    Info   


Enter text below to search the MMD Website with Google



CONTACT FORM: Click HERE to write to the editor, or to post a message about Mechanical Musical Instruments to the MMD

Unless otherwise noted, all opinions are those of the individual authors and may not represent those of the editors. Compilation copyright 1995-2024 by Jody Kravitz.

Please read our Republication Policy before copying information from or creating links to this web site.

Click HERE to contact the webmaster regarding problems with the website.

Please support publication of the MMD by donating online

Please Support Publication of the MMD with your Generous Donation

Pay via PayPal

No PayPal account required

                                     
Translate This Page