Brass Flat Wire for Organ Barrel Pins
By Derek Deane
Hi all, Serge Robillard asked about flat brass wire [090704 MMDigest].
I had the same problem here in Australia, but mine had to be 0.8 mm
wide. I got over the problem by buying 0.75 mm diameter brass wire
and then I flattened it using a set of rollers.
Serge will have to experiment find the diameter of the wire he needs
to suit his requirements.
Regards
Derek Deane
Australia
|
(Message sent Wed, 8 Jul 2009 13:57:32 +1000
, from time zone +1000.)
|
|
