Mechanical Music Digest  Archives
You Are Not Logged In Login/Get New Account
Please Log In. Accounts are free!
Logged In users are granted additional features including a more current version of the Archives and a simplified process for submitting articles.
Home Archives Calendar Gallery Store Links Info
MMD > Archives > June 2013 > 2013.06.14 > 04Prev  Next


Constrictions in Aeolian Secondary Valves
By Jeffrey R. Wood

[ Ref. 130613 MMDigest, Bleeds for Secondary Valves --

The "bleeds" of which Don Barton speaks are not actually bleeds but
rather constrictions to slow the passage of air between the primary
valves and secondary pouches.  This is done to quiet the valve action,
which is otherwise especially noticeable when playing treble passages
unaccompanied by bass notes.

Aeolian pouches were presumably sealed with egg white, a substance
which apparently evaporates over the years, leaving both sets of
pouches quite porous.  If the pouches cannot be made perfectly
airtight, the primary bleeds must be replaced with smaller ones and
the constrictions enlarged to achieve acceptable performance.

Bear in mind that 88-note rolls made by Aeolian and others during the
early period were double-punched to make them more compatible with the
65/88-note instruments [with a tracker bar] designed to play both
types.  Otherwise, small single punches found on later 88-note rolls
will often cause missed notes and require precise tracking to register
at all.

Bear in mind that these valves were designed for actions playing only
65-note rolls, and some modification is required for high performance
when playing 88-note rolls.

If the primary bleeds are #65 drill size, I would recommend replacing
them with #67 or #68.  I have never rubberized a set of primary pouches
in one of these actions, and I worry that if rubberizing stiffens the
pouches somewhat, they may be less responsive because of the extremely
low suction level at which these actions with their oversize pneumatics
operate.

I would enlarge the constrictions somewhat, using a small round file
with the tip ground or broken off.  Absolute uniformity of size will
overcome any normal variations in primary valve travel.

Secondary valve travel was set to 1/16" at the factory (Aeolian was
hung up on fractions!) and tends to increase somewhat on heavily used
notes.  A more realistic travel would involve subtracting at least
0.010" from the 1/16" (0.063") measurement.  This requires getting
card stock and paper punchings which to my knowledge are presently
unobtainable anywhere.  I could perhaps be talked into making some
extras here in my own shop.  Reduction in secondary valve travel will
not only improve repetition, but also have a quieting effect on the
valves.

A single cover board on the front of the stack has an amplifying effect
on valve noise.  Some Aeolian actions have individual cover boards for
each tier, separated by heavy (red) felt.  Changing to the latter type
will also quiet the valves by eliminating the "soundboard" effect.

Presently I have two Steinways with this type of player action that are
performing unacceptably.  Hopefully I will soon gain experience which
should result in more specific recommendations.

Jeffrey R. Wood


(Message sent Fri 14 Jun 2013, 16:34:43 GMT, from time zone GMT-0700.)

Key Words in Subject:  Aeolian, Constrictions, Secondary, Valves

Home    Archives    Calendar    Gallery    Store    Links    Info   


Enter text below to search the MMD Website with Google



CONTACT FORM: Click HERE to write to the editor, or to post a message about Mechanical Musical Instruments to the MMD

Unless otherwise noted, all opinions are those of the individual authors and may not represent those of the editors. Compilation copyright 1995-2024 by Jody Kravitz.

Please read our Republication Policy before copying information from or creating links to this web site.

Click HERE to contact the webmaster regarding problems with the website.

Please support publication of the MMD by donating online

Please Support Publication of the MMD with your Generous Donation

Pay via PayPal

No PayPal account required

                                     
Translate This Page