Announcement: Spring Fundraising Drive In Progress

Please visit our home page to see this and other announcements: https://www.mmdigest.com     Thank you. — Jody

MMD > Archives > Search


Showing 20 of 257 result(s) for powerroll.

Digest NrSubject, Author, Snippet
1998.05.01.14
"PowerRoll" MIDI-Controlled Tracker Bar
from Larry Broadmoore
•>[ Tom is speaking of the new device under development by MMDers Larry >[ Broadmoore and Laurent Coray. The first production model can be >[ used with any 9-chan/inch tracker bar, including Ampico; a variant >[ for Welte T-100 rolls will be next. For more information write to >[ Larry Broadmoore . ...
1998.05.22.03
PowerRoll System
from Jim Moore
•I noticed the the PowerRoll system being mentioned here and was curious if anyone has installed or seen one of these in use. I'm interested in both the quality of the device as well as its' "playability". Any response would be appreciated. Thanks, Jim Moore
1998.05.26.03
PowerRoll Web Site
from Larry Broadmoore
•The PowerRoll(tm) web site, http://www.erolls.com, now shows the first posted photo of the new PowerRoll electrical music roll, as installed in an Ampico "A" drawer. (Please note that the drawer can close over the unit.) Soon we will post more photos, showing the unit installed in the Duo-Art, Welt...
1998.07.05.06
PowerRoll Demo at AMICA Niagara Convention
from Gary Rasmussen
•[ This message from Garry Rasmussen was forwarded to us by [ Larry Broadmore The PowerRoll, the electronic player piano roll developed by Larry Broadmoore of Broadmoore Research Corporation, will be demonstrated by appointment at the AMICA convention in Niagara Falls, by me, Gary Rasmussen. The con...
1998.07.19.13
PowerRoll Performance at AMICA Convention
from Jack M. Conway
•Hi Group, I have been looking for reports from those who attended the AMICA Convention. I saw an article on the Pumper Contest. I am very interested in buying a Broadmoore PowerRoll unit and Wayne Stahnke's Ampico CD-ROM. I would like to hear from anyone that saw the PowerRoll unit perform at the c...
1998.07.21.17
PowerRoll Construction
from Mike Ames
•[ Mike Ames shares this letter with MMD. Tom Jansen, of Monschau, [ Germany, is experienced with both electronic and pneumatic systems, [ and has assisted at both the Milhous museum in Florida and at [ Siegfried Wendel's museum in Rudesheim. I hope we can entice him [ to join the fun at MMD! -- Rob...
1998.07.21.21
PowerRoll Guarantee
from Larry Broadmoore
•Jack, I understand your reasonable concerns and reproduce below a copy of our guarantee, which protects customers from risks of the kind which concern you. If you feel that it is inadequate, please let me know and we will adjust it according to any reasonable suggestions until you feel secure enoug...
1998.07.22.18
PowerRoll Demonstrated at AMICA Convention
from Joe Orens
•Having had the opportunity of seeing, holding, and hearing the PowerRoll at the AMICA Niagara Convention, I would like to share my observations. It is a very impressive, well engineered device. It was professionally and enthusiastically demonstrated at AMICA by Gary Rasmussen and does exactly what ...
1998.07.22.19
PowerRoll, Pianomation & Editing Programs
from Andy Taylor
•In the last digest Larry Broadmoore wrote: > Andy: You recommended Wayne Stahnke's AMPICO files in your article > extolling Pianomation. Since Wayne has often said that he will not > permit these to be translated to MIDI format, I was under the > impression that they could not play on Pianomation a...
1998.08.03.11
PowerRoll & Duo-Art Offset Expression Holes
from Spencer Chase
•I already have a couple of opinions, but thought I could get a few more from the MMD members. As everyone who owns a Duo-Art knows, the expression level holes on the tracker bar are located above the row of note holes. This was done to allow the piano to play either all 88 notes (on earlier 88-note...
1998.08.09.10
PowerRoll & Turbine Pump Problems
from Andy Taylor
•Unforeseen problems with PowerRoll Hi friends. The PowerRoll seems to be a great device, and it works wonderful, but here are a few cautions that should be observed with it. Turbine pumps. When subjected to long plays a turbine motor is prone to overheating. The PowerRoll has a "jukebox" mode (exte...
1998.08.10.05
PowerRoll & Poorly Maintained Pianos
from Andy Taylor
•Hi Gang -- a correction to last article, just to clear things up a bit: I wasn't inferring that there is something wrong with the PowerRoll unit. It is just the fact that some player pianos out there might not take the workout that such a machine is able to give them. These pianos all come in vario...
1998.08.18.15
PowerRoll for T-100 Welte Vorsetzer
from Larry Broadmoore
•In response to Adrian Schmidt's question about playing Welte Licensee rolls on a T-100 Red Welte Vorsetzer, I know of only two ways to do so without damaging the Vorsetzer: 1) Have Licensee rolls recut on Vorsetzer-width paper and to the Vorsetzer scale; or, 2) Place a PowerRoll in the spoolbox of ...
1998.08.24.11
PowerRoll Demo
from Spencer Chase
•If all goes well (UPS delivery and computer reliability) I will be demonstrating the PowerRoll piano interface at the Founding Chapter AMICA meeting on Sunday August 30. The meeting will be at Roy Powlan's house in Orinda, California. Call him at 925-254-0236 for directions and any other informatio...
1998.08.28.06
PowerRoll Demo at Midwest Chapter AMICA Meeting
from Gary Rasmussen
•The PowerRoll, the new electronic music roll for automatic musical instruments, is planned to be demonstrated at the midwest chapter AMICA meeting at Columbus Ohio, Saturday August 29, 1998. The demonstration will take place during the mart on Saturday afternoon between 3:30 and 7:00 P.M. at the ho...
1998.09.03.10
PowerRoll Display at MBSI Convention
from Gary Rasmussen
•The PowerRoll, the electronic roll for pneumatically operated auto- matic musical instruments, will be on display at the MBSI convention in Charlotte, North Carolina at the 'mart' Friday, September 4. I, Gary Rasmussen, will be representing the Broadmoore Research Corporation at this event. Unfortu...
1998.10.24.07
PowerRoll and WindPlay Combination
from Spencer Chase
•With all the talk about the PowerRoll and WindPlay currently going on, I just had to add my two cents. I wrote a very supportive letter to Larry Broadmoore after I was able to get my PowerRoll working very well. I promised to write to the MMD of my experience, but have been very busy lately. I coul...
1998.12.28.09
PowerRoll Upgrade Guarantee
from Larry Broadmoore
•As advertised, the free upgrade policy for the PowerRoll Electrical Music Roll -- which guarantees free change or replacement of any unit purchased before Autumn, 1998 for two years from time of delivery, and which was extended until January 1, 1999 for one year from time of delivery -- is no longe...
1999.01.18.17
PowerRoll Demonstrations in California
from Dave Allan
•I am currently visiting friends and relatives around California and I have one of Larry Broadmoore's PowerRoll units available to demonstrate. If any MMDers out there would like a demonstration please Email me directly and I will attempt to visit your area in the next two weeks. I am currently in t...
1999.01.19.05
PowerRoll Demonstrations in California
from Stephen Kent Goodman
•Hi Everyone, I had the pleasure of meeting Dave Allan and showing him my workshop on Monday. He brought Larry Broadmoore's PowerRoll unit with him. I was quite impressed with the rugged construction and the ease in which it can be mounted to an existing roll frame/tracker bar, without any damage to...

« Previous | Next »

Please Support Publication of the MMD with your Generous Donation
No PayPal account required

 

SSL Certificate
by
Let's Encrypt