Mechanical Music Digest  Gallery
You Are Not Logged In Login/Get New Account
Please Log In. Accounts are free!
Logged In users are granted additional features including a more current version of the Archives and a simplified process for submitting articles.
Home Archives Calendar Gallery Store Links Info
MMD > Gallery > Tech > drumskin


Announcement: End-of-Summer Fundraising Drive In Progress

Our End-Of-Summer Fundraising drive is in progress. If you haven't contributed to the operation of the MMD in the last 12 months, this would be a great time to contribute. There's a PayPal link at the bottom of each page on the website.

If you aren't sure when you last contributed, please send me a note using the contact form at the bottom of this page and I'll look you up in my records.

Thank you for your generous support!
Jody

P.S. While your support is needed and appreciated, you do not need to contribute to be a subscriber. If you have subscribed and aren't receiving your Digest, please use the contact form at the bottom of the page and let me know. Thanks!

drum skin
Replacing a Drum Skin
by Walt Kehoe (060519 MMDigest)

drumskin.gif (2 kb)I had to replace the head on the snare of my Wurlitzer Mandolin PianOrchestra Model 33A.  I soaked the new split rawhide blank in warm water, which allowed it to stretch a bit.

Look at the original carefully as you take it apart; you might have to take out a pie-shape section to see how it was originally wrapped.  You will see the open edge wrapped over the top of the hoop, down the outside, returned across the bottom back up on the inside, then squeezed between the top of the hoop and the underside of the skin and returned over to the outside of the hoop between it and the skin.

You will probably have to use a few, light spring clamps to hold one side on as you do the alternate sides.  It seems impossible but it can be done -- I know, first hand!

Once you have it completely wrapped, keep trying to get rid of any slack by pushing it over the last edge from top to outside, under the side skin.  When you are satisfied you have gotten it as tight as you can, put it aside to dry for a day or so.  It doesn't have to be as "tight as a drum", just so it's not floppy.  When the skin dries, it shrinks and tightens itself.  After all, you take out the extra little bit of slack as you tension the head.  See attached section diagram for a wrapping view.  Hope this helps.

Walter Kehoe
Syosset, New York
Date: Fri, 19 May 2006 00:18:17 -0400


19 May 2006

Home    Archives    Calendar    Gallery    Store    Links    Info   


Enter text below to search the MMD Website with Google
Loading



CONTACT FORM: Click HERE to write to the editor, or to post a message about Mechanical Musical Instruments to the MMD

Unless otherwise noted, all opinions are those of the individual authors and may not represent those of the editors. Compilation copyright 1995-2017 by Jody Kravitz.

Please read our Republication Policy before copying information from or creating links to this web site.

Click HERE to contact the webmaster regarding problems with the website.

Please support publication of the MMD by donating online

Pay via PayPal

No PayPal account required

                                                       
Translate This Page

. .