|Varnish transfer decals are easy to apply and make for a
professional appearance. Most old piano names are available and many
are new old stock. I always buy two of them because they are inexpensive
(about $3.00 each) and just in case I have an accident.
First step would be to locate the part of the piano that you want to
apply the decal. Decals do not always go over Middle C, so measure
carefully. Separate the tissue paper from the cardboard paper at
the corners just a little.
Spread white glue on the decal and position the decal to its final location
(where you want it). Use a plastic credit card to smooth the decal
into position with light pressure. The glue will run out from under
the paper and cardboard backing.
Now peel the cardboard away from the tissue paper carefully, leaving
the tissue paper in place on the piano. I use the credit card again
to carefully smooth out any wrinkles or globs of glue. Let it dry.
In these photos the decal was left to dry for four hours.
The final step is the cleanup of the tissue paper which dissolves in
water. I use a damp wash cloth to clean the tissue paper and excess
glue. These decals are always put on a piano that has a finish.
I have never tried this method on bare wood.
I buy my decals from Larry Ashley, e-mail <email@example.com>.
Sat, 26 Feb 2000 17:56:29 -0600