MMD > Archives > April 1996 > 1996.04.24 > 01Prev  Next


Re: Wire Size Calculations
By Terry Smythe

WOW!

Many thanks for all those responses to my inquiry about determining
wire sizes for a Krakauer grand with no strings.

By chance, I did acquire with it a full set of new bass strings, but
the documentation for wire sizes of the treble strings was missing.
I am aware of the techniques that Craig mentioned to acquire a new set
of bass strings, in fact, have done it before.  But how to determine
wire dimensions for the rest had me stumped.

Fritz Gellerman suggested a book "A Guide To Restringing", by John W.
Travis.    A quick on-line visit to my local library revealed they had
a copy located in the main branch, followed by a quick trip there this
morning, and I'm looking at it right now.    Many thanks Fritz, much
appreciated.

In it is something called "The Klepac Chart" which purports to set out
a simple table of "speaking lengths" against wire size, from 2.04
inches (#13 wire) through to 70.57 inches (#21 wire).    If this is a
surprise to others, as it is to me, you may be interested in this
table, which is as follows:

•       Speaking length               Wire Size

       2.04" to  2.39"                 13
       2.52" to  2.95"                 13 1/2
       3.00" to  3.64"                 14
       3.83" to  4.96"                 14 1/2
       5.25" to  6.83"                 15
       7.20" to  9.34"                 15 1/2
       9.85" to 11.53"                 16
      12.14" to 15.79"                 16 1/2
      16.64" to 19.48"                 17
      20.52" to 24.03"                 17 1/2
      25.32" to 29.62"                 18
      28.12" to 36.50"                 18 1/2
      31.83" to 37.33"                 19
      39.36" to 51.29"                 19 1/2
      48.67" to 63.14"                 20
      60.19" to 70.57"                 20 1/2
      66.90" to 70.57"                 21

•This is an abbreviated list, which also includes specific string
identification against speaking length, which accounts for apparent
overlap in the higher lengths.  The actual table is 2 pages in length,
and if desired, I could upload a .PCX image of the complete table.
Credit is given "courtesy of the Schaff Piano Supply Co., Chicago, IL.

However, it looks too easy, and I've learned that if something is too
good to be true, then it likely is.    Has anybody had experience with
this chart?   Given that other very knowledgeable people have developed
mathematical formulae to do this, can such a simple table be considered
reliable?

Regards,

Terry

•Terry Smythe                       (204) 832-3982 (voice/fax)
55 Rowand Avenue                   smythe@mts.net
Winnipeg, MB, Canada  R3J 2N6      smythe@freenet.mb.ca

(Message sent Wed, 24 Apr 1996 10:40:51 CDT , from time zone -0500.)

Key Words in Subject:  Calculations, Size, Wire