MMD > Archives > May 1998 > 1998.05.06 > 20Prev  Next


Repairing Veneer Dents and Dimples
By Jim Kenney

You might want to try using a small syringe and forcing a little water
into the dimple, under the veneer then put a thick cloth over it and
hold a iron there for a short time.  Between the water swelling the
wood and the hot iron expanding the water, this may pop it out, but
watch the iron: too long and you will damage the finish.  It has worked
for me

Jim Kenney



(Message sent Tue, 5 May 1998 23:09:59 EDT , from time zone -0400.)

Key Words in Subject:  Dents, Dimples, Repairing, Veneer