MMD > Archives > September 2002 > 2002.09.28 > 13Prev  Next


Calliope Blower Designed by Mike Kitner
By Bob Moore

Tom Grace inquired about a small blower for an organ.  Dr. Bill Black
is currently restoring a Tangley calliope and has built a blower that
seems to be what is needed.  Go to http://www.carousels.com/ and view
his article and photos.  While he does not give specifics as to what
he is using, he may respond to an E-mail if asked.  I would assume if
it is capable of powering a calliope, it would be suitable for a small
organ.

Bob Moore
Orlando, FL

 [ Bill is restoring a Tangley CA-43 player calliope and he describes
 [ turbine blower pumps for pressure and suction designed by Mike
 [ Kitner.  The photos don't show any special provision to muffle the
 [ sound of the turbines, so Kitner's design might be too noisy for a
 [ small pipe organ.  See http://www.carousels.com/calpt23.htm
 [  -- Robbie



(Message sent Fri, 28 Sep 2018 12:45:31 -0400 , from time zone -0400.)

Key Words in Subject:  Blower, Calliope, Designed, Kitner, Mike

Related by Subject:
2002.09.30.04 - Calliope Blower Designed by Mike Kitner
from Bill Black
2002.09.28.13 (This article) - Calliope Blower Designed by Mike Kitner
from Bob Moore