MMD > Archives > April 2004 > 2004.04.17 > 06Prev  Next


Reverting to Pedals for a Player Piano
By Craig Smith

From what I see of the vacuum system that was added to Claudine's
piano, there is a very simple test.  The spiral hose could even be
causing the leak through the spirals.  Simply pull the hose off the
fitting on the pedal chest and cover the opening with duct tape.
Let's see how it pumps then.

If it still leaks, the first thing I'd do is have someone pump quietly
and get under the piano and listen for leaks at every one of those old
joints.  Can't do that with the vacuum box running.  It would be easier
if you had a stethoscope (without the end piece).  You can get one for
about $10 at the store or on e-bay.

Craig Smith



(Message sent Sat, 17 Apr 2004 09:18:53 -0400 , from time zone -0400.)

Key Words in Subject:  Pedals, Piano, Player, Reverting

Related by Subject:
2012.01.25.06 - Switching Repeating- to Single-stroke Xylophone
from Clay Hinrichs
2011.04.01.03 - Making Coinola Xylophone Repeating Pneumatics
from Don Teach
2009.12.28.02 - Mounting a Repeating Snare Beater
from Kent Zacherl
2004.04.28.03 - Reverting to Pedals for a Player Piano
from Claudine Jones
2004.04.17.05 - Reverting to Pedals for a Player Piano
from Michael Hamilton
2004.04.17.06 (This article) - Reverting to Pedals for a Player Piano
from Craig Smith
2004.04.16.04 - Reverting to Pedals for a Player Piano
from John A. Tuttle
2004.04.15.09 - Reverting to Pedals for a Player Piano
from Michael Hamilton
2004.04.15.10 - Reverting to Pedals for a Player Piano
from Craig Smith
2004.04.14.08 - Reverting to Pedals for a Player Piano
from Jon Page
2004.04.13.05 - Reverting to Pedals for a Player Piano
from John A. Tuttle
2004.04.12.08 - Reverting to Pedals for a Player Piano
from John A. Tuttle