MMD > Archives > May 2004 > 2004.05.13 > 04Prev  Next


Painting the Leather of Fair Organ Figures
By Lloyd Osmundson 

Hi Everyone,  Here is a subject I don't think I have seen posted on
MMD before.  It is regarding band organ leader [director] statue paint.
I'm recovering both moveable elbows joints on my statue with pouch
leather.  What type of paint sealer, and also what finish paint,
should I use on this leather to keep it flexible?

Thanks for your help.
Lloyd Osmundson
So. California

(Message sent Thu, 13 May 2004 12:21:41 -0700 , from time zone -0700.)

Key Words in Subject:  Fair, Figures, Leather, Organ, Painting

Related by Subject:
2004.05.13.04 (This article) - Painting the Leather of Fair Organ Figures
2021.06.06.04 - 3D Printing of Piano Roll Spool Flanges
from Marshall Jose
2021.04.19.01 - Replicating Labels: Digital Imaging & Printing
from Monica Jones
2021.02.11.02 - Painting a Calfskin Drum Head
from Mike Perry
2021.02.05.04 - Seek Piano Roll Label Printing Service
from Kel Geiger
2021.01.22.04 - 3D Printing of Ampico Jumbo Spool Flanges
from Mike Nicholls
2021.01.08.01 - Painting a Calfskin Drum Head
from Mike Perry
2020.12.16.04 - 3D Printing of Piano Roll Spool Flanges
from Rich Sitler
2020.12.12.03 - 3D Printing of Piano Roll Spool Flanges
from Jon Page
2020.12.09.02 - 3D Printing of Piano Roll Spool Flanges
from Piotr Barcz
2020.12.05.01 - 3D Printing of Piano Roll Spool Flanges
from Ian Hamilton
2020.12.05.02 - 3D Printing of Elbows and Tees
from John Grant