MMD > Archives > June 2005 > 2005.06.27 > 07Prev  Next


Painting A Band Organ Case
By Chris Carlisle 

Any suggestions about the best way to paint a band organ case?  I want
to use an air compressor, but I am unsure of the size.  Does anyone have
any information that would help me?

Chris Carlisle

  [ Paint, stain, varnish?
  [ Forget the compressor.
  [
  [ --Editor

(Message sent Sun, 26 Jun 2005 19:35:26 -0500 , from time zone -0500.)

Key Words in Subject:  Band, Case, Organ, Painting

Related by Subject:
2005.06.27.07 (This article) - Painting A Band Organ Case
2021.06.06.04 - 3D Printing of Piano Roll Spool Flanges
from Marshall Jose
2021.04.19.01 - Replicating Labels: Digital Imaging & Printing
from Monica Jones
2021.02.11.02 - Painting a Calfskin Drum Head
from Mike Perry
2021.02.05.04 - Seek Piano Roll Label Printing Service
from Kel Geiger
2021.01.22.04 - 3D Printing of Ampico Jumbo Spool Flanges
from Mike Nicholls
2021.01.08.01 - Painting a Calfskin Drum Head
from Mike Perry
2020.12.16.04 - 3D Printing of Piano Roll Spool Flanges
from Rich Sitler
2020.12.12.03 - 3D Printing of Piano Roll Spool Flanges
from Jon Page
2020.12.09.02 - 3D Printing of Piano Roll Spool Flanges
from Piotr Barcz
2020.12.05.01 - 3D Printing of Piano Roll Spool Flanges
from Ian Hamilton
2020.12.05.02 - 3D Printing of Elbows and Tees
from John Grant