MMD > Archives > June 2005 > 2005.06.29 > 02Prev  Next


Painting A Band Organ Case
By Hal Davis 

Perhaps Jan Kijlstra might find some useful information in
Bill Black's series on restoring a Style 105 Wurlitzer band organ,
at http://www.carousels.com/wurlitzer_series.asp/ 

Hal Davis

(Message sent Wed, 29 Jun 2005 03:02:07 -0700 , from time zone -0700.)

Key Words in Subject:  Band, Case, Organ, Painting

Related by Subject:
2005.06.29.02 (This article) - Painting A Band Organ Case
2021.06.06.04 - 3D Printing of Piano Roll Spool Flanges
from Marshall Jose
2021.04.19.01 - Replicating Labels: Digital Imaging & Printing
from Monica Jones
2021.02.11.02 - Painting a Calfskin Drum Head
from Mike Perry
2021.02.05.04 - Seek Piano Roll Label Printing Service
from Kel Geiger
2021.01.22.04 - 3D Printing of Ampico Jumbo Spool Flanges
from Mike Nicholls
2021.01.08.01 - Painting a Calfskin Drum Head
from Mike Perry
2020.12.16.04 - 3D Printing of Piano Roll Spool Flanges
from Rich Sitler
2020.12.12.03 - 3D Printing of Piano Roll Spool Flanges
from Jon Page
2020.12.09.02 - 3D Printing of Piano Roll Spool Flanges
from Piotr Barcz
2020.12.05.01 - 3D Printing of Piano Roll Spool Flanges
from Ian Hamilton
2020.12.05.02 - 3D Printing of Elbows and Tees
from John Grant