MMD > Archives > September 2009 > 2009.09.09 > 02Prev  Next


Pouch Leather Thickness for Aeolian Action
By John Phillips 

Hello MMD.  After much dithering and procrastination I have decided
to replace the pouches in the Aeolian upper action in my Steck upright
with Columbia Organ's maroon leather pre-cut pouches, 1.375" (1-3/8")
in diameter.

However, I seem to have a choice of leather thickness, and I really
don't have much idea what would be best.  Any advice would be welcome.

John Phillips in Hobart, Tasmania

(Message sent Thu, 10 Sep 2009 00:23:55 +1000 , from time zone +1000.)

Key Words in Subject:  Action, Aeolian, Leather, Pouch, Thickness

Related by Subject:
2009.09.09.02 (This article) - Pouch Leather Thickness for Aeolian Action
2026.01.08.02 - Seek Starr Pneumatic Pouch Blocks
from John Acton
2024.12.05.01 - Seek PPCo Vacuum Supply Cut-Out Pouch Block
from John Ravert, Sr.
2022.09.27.03 - Lock and Cancel System Uses Pouch Valve
from Don Teach
2022.09.26.03 - Lock and Cancel System Uses Pouch Valve
from John Wolbach
2022.09.24.01 - Lock and Cancel System Uses Pouch Valve
from Robbie Rhodes
2019.08.15.02 - Forming the Contour of a Valve Pouch
from John A. Tuttle
2019.08.15.03 - Forming the Contour of a Valve Pouch
from Roger Wiegand
2019.08.13.02 - Forming the Contour of a Valve Pouch
from Dave Krall
2018.11.03.07 - Ampico A Distribution Block & Stack Cut-Out Pouch
from Mike Walter
2018.04.21.03 - Contour of a Pouch
from Richard Friedman
2018.04.18.03 - Contour of a Pouch
from John A. Tuttle