MMD > Archives > September 2010 > 2010.09.03 > 06Prev  Next


Wurlitzer 153 Pneumatic Problems
By Bob Hodge

Re Jeff Bryner's post, I found that a leaky hose will cause this to
happen.  A friend's Ampico would exhibit exactly the same symptoms
you describe.  In this case, it was caused by a piece of lead tubing,
with several pinhole leaks, in a short segment from the tracker bar.

I cut out the defective segment and inserted a short piece of rubber
stock.  Problem solved, for now.  I found the leak by having my friend
blow into the tracker bar with a hose and listening for air with
another piece of tubing in my ear while laying down under the drawer.

Replacing all of the lead from the tracker wasn't an option at that
time, but would have been the way to go if finances were better.

Hope this helps!

Bob Hodge



(Message sent Fri, 3 Sep 2010 11:58:39 -0400 , from time zone -0400.)

Key Words in Subject:  153, Pneumatic, Problems, Wurlitzer

Related by Subject:
2010.09.03.06 (This article) - Wurlitzer 153 Pneumatic Problems
from Bob Hodge
2010.09.03.07 - Wurlitzer 153 Pneumatic Problems
from Matthew Caulfield
2010.09.03.08 - Wurlitzer 153 Pneumatic Problems
from John Rutoskey
2010.09.02.02 - Wurlitzer 153 Pneumatic Problems
from Jeff Bryner