MMD > Archives > July 2013 > 2013.07.26 > 05Prev  Next


Kimball Valve Clearance Setting
By Don Gehrke 

I am working on my 1927 Kimball stack which has the metal ring lower
valve seat and the adjustable screw in the Bakelite upper valve seat.
When the valve is seated on the lower valve seat, what should be the
clearance between the top of the valve and the upper Bakelite valve
seat?  Thank you for your help in advance.

Don Gehrke

(Message sent Thu, 25 Jul 2013 19:36:01 -0700 (PDT) , from time zone -0700.)

Key Words in Subject:  Clearance, Kimball, Setting, Valve

Related by Subject:
2013.07.26.05 (This article) - Kimball Valve Clearance Setting
2025.08.31.02 - Seek Kimball Player Piano Parts & Service Manual
from James Williams
2024.12.18.01 - Seek Kimball Player Piano Parts
from James Williams
2024.05.01.04 - Kimball Electramatic Model F Player Problem
from John A. Tuttle
2024.04.29.02 - Kimball Electramatic Model F Player Problem
from Keith Gramlich
2024.04.20.01 - Recovering Kimball Electramatic Plastic Pneumatics
from David Dewey
2024.04.19.01 - Recovering Kimball Electramatic Plastic Pneumatics
from William Frisk
2021.02.10.04 - Seek Drive Motor for Kimball Model "F" Player
from John A. Tuttle
2021.02.06.03 - Seek Kimball Model E & F Motor and Gear Box
from John A. Tuttle
2021.01.04.01 - Seek Reroll Motor for Kimball Player Piano
from Jim Nelms
2020.06.26.05 - Kimball Phrasonome Player Piano
from Jim Hoss
2020.06.23.01 - Kimball Phrasonome Player Piano
from John Grant