Here is some information about replacing the original red fiber valve
guides on the Standard player action double valve system.

The quick fix -- go to Lowe's building supplies and go to the kitchen
cabinet section.  Look in the counter-top area for samples of Formica
colors.  They're free.  Then go over to the hardware section and look
for Hillman Nylon Spacer H-880426, 3/16" x .115" x 1".  Or go to
Hillman's on-line parts (they stock this size in long lengths):

http://wedo.hillmangroup.com/item/all-categories/natural-nylon-spacers-3-16-1-4-/58004-c 

Formica is .035" thick and it's easy to machine, drill and is
structurally strong.  You can duplicate the original by using it as
a pattern.

Size the center hole so as to get a press fit for the Nylon bushing.
Nylon is not easy to machine, so cut it with a metal saw and then file
to length.  You can leave 1/32" for glue.  I glued two sheets together
for increased strength at 0.070" thick.

If you went to see the samples I made request an Email; I will send
photo attachments.

Lee Walker
Indiana
sharron_walker_251@comcast.net.geentroep [delete ".geentroep" to reply]