MMD > Archives > July 1998 > 1998.07.11 > 09Prev  Next


Steel Punches for Stencil Cutting
By Russ Doering 

A machine tool place should have letter and number punches -- a place
where they sell drill bits, milling cutters, grinding wheels, and
milling machines, drill presses.  Also a good hardware store may carry
them.

Russ Doering

(Message sent Sat, 11 Jul 1998 05:19:29 EDT , from time zone -0400.)

Key Words in Subject:  Cutting, Punches, Steel, Stencil

Related by Subject:
1998.07.11.09 (This article) - Steel Punches for Stencil Cutting
2024.01.05.01 - Flat Steel Bar Stock For Player Pianos
from Don Teach
2023.03.29.03 - Seek Steel Pins from 65-note Roll Spool Ends
from John Grant
2023.03.23.01 - Seek Steel Pins from 65-note Roll Spool Ends
from John Grant
2020.09.30.02 - Seek Machinist To Make Special Steel Valve Punches
from Dave Krall
2018.10.07.02 - Ragtime Automated Music Steel Drum Orchestrion
from Tom Noble
2017.11.15.01 - FS: Coin-op Player Piano & Automated Steel Drum
from Amanda Sheaffer
2015.05.22.04 - Coloring a Metal Surface: Bluing Steel
from Craig Smith
2015.05.21.04 - Coloring a Metal Surface: Bluing Steel
from Christian Eric
2013.03.07.02 - Steel for Making a Musical Movement Comb
from Paul Eatherington
2013.03.07.03 - Steel for Making a Musical Movement Comb
from Jonathan Herz
2013.03.05.03 - Steel for Making a Musical Movement Comb
from Michael E Schaffter