MMD > Archives > January 2000 > 2000.01.22 > 15Prev  Next


Sponge Neoprene in Dynavoice Valves
By Tom Lear

As Bob Taylor says, it all has to do with the quality of the original
product.  I believe the 40-year-old Dynavoice valves and maybe the
pouches are sponge neoprene.   (I sent one to D. L. Bullock last year
and I believe that's what he thought they were made of).  I had very
few torn pouches, but they were not brittle, all the valves were still
supple.  I did reline the exhaust port faces of the valves with gum
rubber suggested by Mr. Bullock, but more to reduce travel rather than
because of the face being degraded.

Tom Lear
San Francisco CA



(Message sent Sat, 22 Jan 2000 04:49:14 EST , from time zone -0500.)

Key Words in Subject:  Dynavoice, Neoprene, Sponge, Valves

Related by Subject:
2000.01.22.15 (This article) - Sponge Neoprene in Dynavoice Valves
2016.12.02.03 - Polyethylene Sponge Gaskets for Ampico Valves
from Spencer Chase
2015.02.24.03 - Sponge Neoprene for Valve Seats
from Ralph Nielsen
2015.02.22.05 - Sponge Neoprene for Valves
from D. L. Bullock
2015.02.20.04 - Sponge Neoprene for Valves
from John A. Tuttle
2015.02.19.09 - Sponge Neoprene for Valve Seats
from D. L. Bullock
2012.10.26.02 - Sponge Rubber Valve Cores Survive 20 Years
from Bob Taylor
2012.10.23.03 - Sponge Rubber Valve Cores
from Bruce Grimes
2012.10.21.06 - Sponge Rubber Valve Cores Survive 20 Years
from Bob Taylor
2011.03.02.02 - Source of Sponge Rubber for Valve Facing Material
from John Meadows
2011.03.01.05 - Sponge Neoprene
from Robert Loeffler
2011.03.01.04 - Source of Sponge Rubber for Valve Facing Material
from Spencer Chase