MMD > Archives > January 2007 > 2007.01.21 > 06Prev  Next


Making Wurlitzer 105 Unit Valves
By John Haass 

[ Nigel Perry wrote in 070113 MMDigest:

> I have found a source of these valves but, whilst they are of the
> highest quality and I should be buying a set, they add substantially
> to the overall cost.

Nigel,  I made all the valves for my Wurlitzer 105 and it was not
an expensive project at all.  If you would like, I would be more than
happy to show you how I did them.  Please email me if you have any
questions.

Thanks
John Haass

(Message sent Sun, 21 Jan 2007 06:53:49 -0700 , from time zone -0700.)

Key Words in Subject:  105, Making, Unit, Valves, Wurlitzer

Related by Subject:
2007.01.21.06 (This article) - Making Wurlitzer 105 Unit Valves
2025.07.05.03 - Audio-To-MIDI Transcriptions For Making Piano Rolls
from Piotr Barcz
2024.01.25.02 - Making Wurlitzer Unit Valves
from Wallace Venable
2024.01.24.03 - Making Wurlitzer Unit Valves
from Jeff Kunkel
2022.03.19.01 - Paper Tape Marking Pen and Transport Kit
from Mark Kinsler
2021.03.25.01 - Video: The Making of the Seabreeze Carousel
from Matthew Caulfield
2021.03.25.05 - FS: Tools for Making Barrels for Barrel Organs
from Anatoly Zayaruzny
2021.03.24.01 - Video: The Making of the Seabreeze Carousel
from Andrew Lardieri
2020.12.26.03 - Making Wurlitzer Unit Valves
from Don Teach
2020.08.13.03 - Making Chime Rods
from Karl Schröder
2020.08.11.03 - Making Chime Rods For Chiming Clocks
from Mark Kinsler
2019.10.28.02 - Making Wurlitzer Band Organs Play Caliola Rolls
from Glenn Thomas