MMD > Archives > August 2007 > 2007.08.22 > 06Prev  Next


Penetrating Oil - Kroil
By Bob Loesch

> Is this US product [Kroil], in UK terms, WD40, does anyone know?

Hello Nigel.  Kroil is definitely _not_ WD40!  WD40 contains some oil,
but is mostly solvent, and its lubricating properties dissipate rather
rapidly.

I've repaired clocks, and one of the things I hate to see is a "repair"
that has been done by soaking a clockwork in WD40 -- it hardens into
a glaze or coating that is very difficult to remove.  Kroil, when its
solvent evaporates, leaves behind a very thin oil which acts as a
lubricant, but doesn't form a glaze like whatever is in WD40.

WD40, as its name (Water Displacing formula number 40) implies, has
only one good use, and that is displacing water on a mechanism that has
become wet.  After the water is gone, the item should be rinsed with
something like denatured alcohol or acetone, dried, and then lubricated
properly.

Bob Loesch



(Message sent Wed, 22 Aug 2007 08:17:43 -0700 , from time zone -0700.)

Key Words in Subject:  Kroil, Oil, Penetrating

Related by Subject:
2007.08.22.06 (This article) - Penetrating Oil - Kroil
2007.09.01.06 - Penetrating Oil - Marvel Mystery Oil
from Doug Hershberger
2007.08.30.04 - Penetrating Oil - Neoval
from Hans J. Schweizer
2007.08.29.03 - Penetrating Oil - WD-40
from Jeff Bridges
2007.08.29.04 - Penetrating Oil - Gibbs
from Dean T. Smith
2007.08.28.02 - Penetrating Oil - The Kroil & WD-40 Saga
from Nigel Perry
2007.08.28.01 - Penetrating Oil - WD-40
from Glen R. Perye Jr.
2007.08.27.04 - Penetrating Oil - Kroil Non-aerosol
from Wes Melander
2007.08.27.03 - Penetrating Oil - TSI301
from Jim Katz
2007.08.27.05 - Penetrating Oil - WD-40
from Keith Reedman
2007.08.26.04 - Penetrating Oil - Kroil
from Eliyahu Shahar
2007.08.23.04 - Penetrating Oil - Kroil
from Nigel Perry