MMD > Archives > July 2008 > 2008.07.15 > 03Prev  Next


Kimball Electramatic Motor Problem
By Scott Wymer 

When the start button is pushed, it does not play.  When the roll
is manually advanced and released, the drive will rewind and stop as
it should.  I don't see the motor turning at all when play button is
pushed.  I don't have a schematic but I suspect the culprit is one of
the three relays K1, K2 or K3.  Does anyone have an idea about this?
If it is the relay, does anyone have a part number?

Scott Wymer

(Message sent Tue, 15 Jul 2008 15:35:18 -0700 , from time zone -0700.)

Key Words in Subject:  Electramatic, Kimball, Motor, Problem

Related by Subject:
2008.07.15.03 (This article) - Kimball Electramatic Motor Problem
2025.08.31.02 - Seek Kimball Player Piano Parts & Service Manual
from James Williams
2024.12.18.01 - Seek Kimball Player Piano Parts
from James Williams
2024.05.01.04 - Kimball Electramatic Model F Player Problem
from John A. Tuttle
2024.04.29.02 - Kimball Electramatic Model F Player Problem
from Keith Gramlich
2024.04.20.01 - Recovering Kimball Electramatic Plastic Pneumatics
from David Dewey
2024.04.19.01 - Recovering Kimball Electramatic Plastic Pneumatics
from William Frisk
2021.02.10.04 - Seek Drive Motor for Kimball Model "F" Player
from John A. Tuttle
2021.02.06.03 - Seek Kimball Model E & F Motor and Gear Box
from John A. Tuttle
2021.01.04.01 - Seek Reroll Motor for Kimball Player Piano
from Jim Nelms
2020.06.26.05 - Kimball Phrasonome Player Piano
from Jim Hoss
2020.06.23.01 - Kimball Phrasonome Player Piano
from John Grant