MMD > Archives > December 2011 > 2011.12.31 > 08Prev  Next


Steel Pin Ends for 65-note Roll Spools
By Mark Haas 

[ Philip Jamison wrote in 111228 MMDigest:

> Does anyone sell the steel pin ends for 65-note rolls?  I want to
> make some orchestrion roll flanges and cores, and some ready-made
> pins would save time.

We have some 65-note player piano rolls for sale at a dime each, plus
shipping.  You would have to remove the pins and maybe this would serve
your purpose.

Mark Haas

(Message sent Sat, 31 Dec 2011 06:56:49 -0800 (PST) , from time zone -0800.)

Key Words in Subject:  65-note, Ends, Pin, Roll, Spools, Steel

Related by Subject:
2011.12.31.08 (This article) - Steel Pin Ends for 65-note Roll Spools
2024.01.05.01 - Flat Steel Bar Stock For Player Pianos
from Don Teach
2023.03.29.03 - Seek Steel Pins from 65-note Roll Spool Ends
from John Grant
2023.03.23.01 - Seek Steel Pins from 65-note Roll Spool Ends
from John Grant
2020.09.30.02 - Seek Machinist To Make Special Steel Valve Punches
from Dave Krall
2018.10.07.02 - Ragtime Automated Music Steel Drum Orchestrion
from Tom Noble
2017.11.15.01 - FS: Coin-op Player Piano & Automated Steel Drum
from Amanda Sheaffer
2015.05.22.04 - Coloring a Metal Surface: Bluing Steel
from Craig Smith
2015.05.21.04 - Coloring a Metal Surface: Bluing Steel
from Christian Eric
2013.03.07.02 - Steel for Making a Musical Movement Comb
from Paul Eatherington
2013.03.07.03 - Steel for Making a Musical Movement Comb
from Jonathan Herz
2013.03.05.03 - Steel for Making a Musical Movement Comb
from Michael E Schaffter