MMD > Archives > July 2014 > 2014.07.18 > 06Prev  Next


Making Blotter Paper Gaskets
By Don Teach

Paper gaskets made with blotter paper are fairly easy to make.  It is
easiest if you have a set of arch punches but if you don't then a sharp
pair of scissors can do the trick.  I have bought blotter paper from an
office supply store in the past.  I have also used thin leather in the
past with great results.

Make a pattern that you can use to make a tracing onto the paper.  Then
simply cut out with a pair scissors.  If you plan on working on players
full time then consider investing in a set of Arch punches and a hand
rotary punch.

Don Teach - Shreveport Music Co.
Shreveport, Louisiana



(Message sent Fri, 18 Jul 2014 14:06:36 -0500 , from time zone -0500.)

Key Words in Subject:  Blotter, Gaskets, Making, Paper

Related by Subject:
2014.07.18.06 (This article) - Making Blotter Paper Gaskets
2025.07.05.03 - Audio-To-MIDI Transcriptions For Making Piano Rolls
from Piotr Barcz
2024.01.25.02 - Making Wurlitzer Unit Valves
from Wallace Venable
2024.01.24.03 - Making Wurlitzer Unit Valves
from Jeff Kunkel
2022.03.19.01 - Paper Tape Marking Pen and Transport Kit
from Mark Kinsler
2021.03.25.01 - Video: The Making of the Seabreeze Carousel
from Matthew Caulfield
2021.03.25.05 - FS: Tools for Making Barrels for Barrel Organs
from Anatoly Zayaruzny
2021.03.24.01 - Video: The Making of the Seabreeze Carousel
from Andrew Lardieri
2020.12.26.03 - Making Wurlitzer Unit Valves
from Don Teach
2020.08.13.03 - Making Chime Rods
from Karl Schröder
2020.08.11.03 - Making Chime Rods For Chiming Clocks
from Mark Kinsler
2019.10.28.02 - Making Wurlitzer Band Organs Play Caliola Rolls
from Glenn Thomas