MMD > Archives > December 2015 > 2015.12.01 > 10Prev  Next


Fitting H. C. Bay Exhauster to Standard Action
By Don Teach 

[ Ref. Luke Myers in 151129 MMDigest ]

Luke, you're taking a step backwards with those pumps.  Get the
originals restored.  That "canvas looking material" is heavy pump
cloth with a rubber layer sandwiched inside the cloth.  Some people
refer to it as "Hartz cloth".  It's still used in automobile industry.
Please heed the advice previously given -- use the original pumps.

Don Teach
Shreveport, Louisiana

(Message sent Mon, 30 Nov 2015 22:34:19 -0600 , from time zone -0600.)

Key Words in Subject:  Action, Bay, C, Exhauster, Fitting, H, Standard

Related by Subject:
2016.07.18.06 - Unknown Fittings on Standard Action Pump
from John Neiswinger
2015.12.02.05 - Fitting H. C. Bay Exhauster to Standard Action
from Alan Turner
2015.12.01.10 (This article) - Fitting H. C. Bay Exhauster to Standard Action
from Don Teach
2015.11.29.05 - Fitting H. C. Bay Exhauster to Standard Action
from Luke Myers
2012.03.05.06 - Fitting Angelus Piano Player Pedal Springs
from Bradley Jones
2012.03.02.09 - Fitting Angelus Piano Player Pedal Springs
from Steve Blanton
2007.11.12.09 - Fitting Salvaged Player Piano Part
from Niels Berkers
2007.11.11.11 - Fitting Salvaged Player Piano Parts
from Eliyahu Shahar
2007.09.13.03 - Retro-fitting Ragtime Automatic Music Co. Units
from Kim Bunker
2007.05.05.06 - Source of Plastic Tubing and Fittings
from Glen R. Perye Jr.
2006.07.18.02 - Brass Fittings for Musical Box Cases
from Renaissance Le Corbeau
2006.07.18.01 - Replicating Hooks & Fasteners & Brass Fittings
from Frank Metzger