MMD > Archives > December 2015 > 2015.12.03 > 04Prev  Next


Speed of Ampico A Pump and Motor
By Darryl Zempel 

Does anyone have an idea of the speed (RPMs) of the Ampico A motors?
I have a 1925 Chickering 1/4 grand and am rebuilding the vacuum pump.
I would like to test it before reinstalling it using an appropriate
motor RPM.  Any ideas or info would be greatly appreciated.

Thanks,
Darryl Zempel

(Message sent Thu, 3 Dec 2015 12:05:50 -0800 (PST) , from time zone -0800.)

Key Words in Subject:  Ampico, Motor, Pump, Speed

Related by Subject:
2015.12.03.04 (This article) - Speed of Ampico A Pump and Motor
2023.01.06.02 - Measuring the Speed of an Air Motor
from Jon Page
2023.01.06.03 - Measuring the Speed of an Air Motor
from Craig Smith
2023.01.05.01 - Measuring the Speed of an Air Motor
from John A. Tuttle
2023.01.05.02 - Measuring the Speed of an Air Motor
from Spencer Chase
2023.01.05.03 - Measuring the Speed of an Air Motor
from Wayne Finger
2023.01.04.01 - Measuring the Speed of an Air Motor
from John Grant
2023.01.03.02 - Measuring the Speed of an Air Motor
from David Dewey
2023.01.02.02 - Measuring the Speed of an Air Motor
from John A. Tuttle
2020.12.01.03 - Speed Control for Electric Suction Box
from John A. Tuttle
2020.11.28.05 - Speed Control for Electric Suction Box
from John McClelland
2020.10.30.01 - Early T-100 Welte-Mignon Dual Sustain Pedal Speeds
from Jim Miller