MMD > Archives > February 2021 > 2021.02.11 > 02Prev  Next


Painting a Calfskin Drum Head
By Mike Perry 

Several months ago I asked if anyone could recommend what kind of
paint to use on a drum head. I wanted a dancing couple painted like
you see on so many dance organs. Everyone who replied said to use oil
paint. I just want to thank everyone who took the time to respond.

Mike Perry

(Message sent Thu, 11 Feb 2021 13:27:33 -0800 (PST) , from time zone -0800.)

Key Words in Subject:  Calfskin, Drum, Head, Painting

Related by Subject:
2021.06.06.04 - 3D Printing of Piano Roll Spool Flanges
from Marshall Jose
2021.04.19.01 - Replicating Labels: Digital Imaging & Printing
from Monica Jones
2021.02.11.02 (This article) - Painting a Calfskin Drum Head
from Mike Perry
2021.02.05.04 - Seek Piano Roll Label Printing Service
from Kel Geiger
2021.01.22.04 - 3D Printing of Ampico Jumbo Spool Flanges
from Mike Nicholls
2021.01.08.01 - Painting a Calfskin Drum Head
from Mike Perry
2020.12.16.04 - 3D Printing of Piano Roll Spool Flanges
from Rich Sitler
2020.12.12.03 - 3D Printing of Piano Roll Spool Flanges
from Jon Page
2020.12.09.02 - 3D Printing of Piano Roll Spool Flanges
from Piotr Barcz
2020.12.05.01 - 3D Printing of Piano Roll Spool Flanges
from Ian Hamilton
2020.12.05.02 - 3D Printing of Elbows and Tees
from John Grant
2020.10.21.05 - Printing Words On QRS "Boogie Woogie Piano"
from Mike Walter