Modular Magnet Driver System
By Bill Klinger
The Modular Magnet Driver system available from Klinger Organ now has
available an 8-note driver board in addition to the standard 32-note
driver boards. All boards are pluggable end-to-end to make up systems
from 8-notes to 128-notes in increments of 8 notes.
Any note can be assigned to any channel via the MIDI IN port. A MIDI
Through socket on each controller card allows daisy chaining the
controller boards. Standard output current is rated at 500 milliamps
per circuit. Each circuit terminates with a rising clamp screw
The controller card can be configured to apply 12 volts d.c. power
out to two of the unused wires in the MIDI IN socket in order to power
a MIDI file player without having a separate power wire to the player.
Some photos and additional information at http://klingerorgan.com/
at the magnet driver button.
firstname.lastname@example.org [delete ".geentroep" to reply]
(Message sent Fri 13 Nov 2015, 21:30:05 GMT, from time zone GMT-0800.)