MMD > Archives > December 1996 > 1996.12.14 > 07Prev  Next


Re: Removing Old Tracker Bar Tubing
By Stephen Kent Goodman

I formerly soaked tracker bars in a bucket of gasoline, before the price
of gas went up to over $1.00 a gallon!  I guess being a non-smoker has at
least one safety advantage.  Take a stiff wire brush and clean the gunk
off after you have worked the swollen tubing that is removed easily after
a few hours.  And make sure you don't play with matches or have any spark
or open flame condition anywhere near the soaking area.  You can use
"regular unleaded" gasoline for 88-note players, but you'll have to use
"premium" for a reproducing piano!

Stephen Kent Goodman

 [ With, I presume, "No-Knock" additives for tired orchestrions!   ;-)
 [ -- Robbie



(Message sent Sat, 14 Dec 1996 11:21:45 -0500 , from time zone -0500.)

Key Words in Subject:  Bar, Old, Removing, Tracker, Tubing

Related by Subject:
1996.12.14.07 (This article) - Re: Removing Old Tracker Bar Tubing
2024.10.24.01 - Removing Lead Weights From Piano Keys
from Jon Page
2024.10.22.01 - Removing Lead Weights From Piano Keys
from Ben Gottfried
2024.10.20.02 - Removing Lead Weights From Piano Keys
from Larry Richards
2024.10.17.01 - Removing Lead Weights From Piano Keys
from Don Teach
2024.10.17.02 - Removing Lead Weights From Piano Keys
from Brian Shaw
2024.10.16.01 - Removing Lead Weights From Piano Keys
from Bernt Damm
2024.10.14.01 - Removing Lead Weights From Piano Keys
from Geoff Ward
2024.10.13.02 - Removing Lead Weights From Piano Keys
from Jon Page
2024.10.13.03 - Removing Lead Weights From Piano Keys
from Craig Smith
2024.10.09.01 - Removing Lead Weights From Piano Keys
from Karl Juelg
2023.10.06.02 - Removing a Duo-Art Piano Pump Pulley
from Spencer Chase