MMD > Archives > April 1997 > 1997.04.28 > 10Prev  Next


Salvaging Sunken Pianos
By Mike Knudsen

I am a certified SCUBA diver who has made quite a few dives in Lake
Michigan off Chicago.  It is indeed impressive how well preserved wooden
and metal artifacts are in these cold, salt-free waters.  Where else can
you see a walking-beam side-wheel steam engine whose bolts look as if you
could break them loose given a big enough wrench?

When I saw last week's post, yes, I concluded that a player piano dumped
in the Lake would probably still be recognizable, and with great care you
could probably answer questions as to what type of tracking device was
used, size of bellows, etc.  And even Elmer's-glued joints would be loose
by now :-)

You might even salvage a tracker bar in usable condition.  Other than
that, all you would get would be information useful in reconstructing or
restoring a land-based instrument of the same model.

I've yet to hear any divers or dive-boat skippers mention piles of "junk"
underwater or anything other than shipwrecks, but I'll keep my ears open.

Mike Knudsen



(Message sent Mon, 28 Apr 97 10:33:31 CDT , from time zone -0500.)

Key Words in Subject:  Pianos, Salvaging, Sunken

Related by Subject:
2000.01.14.05 - Salvaging Roll Labels
from Adam G. Ramet
2000.01.13.07 - Salvaging Roll Labels
from John Phillips
2000.01.06.07 - Salvaging Roll Labels
from Tim Baxter
1998.09.16.14 - Salvaging Leather Bellows
from Damon Atchison
1997.10.15.16 - Salvaging Player Pianos
from Al Pebworth
1997.10.15.17 - Salvaging Player Pianos
from Bruce Clark
1997.10.15.18 - Salvaging Player Pianos
from Andy Taylor
1997.10.14.07 - Salvaging Player Pianos
from Al Pebworth
1997.10.14.08 - Salvaging Player Pianos
from D. L. Bullock
1997.10.12.04 - Salvaging Player Pianos
from Damon Atchison
1997.04.28.10 (This article) - Salvaging Sunken Pianos
from Mike Knudsen
1997.04.26.06 - Salvaging Sunken Pianos
from Dan Wilson