MMD > Archives > January 2010 > 2010.01.13 > 07Prev  Next


Making Simple Decals
By Mike Schoeppner 

Here is a novel method of making simple decals I have heard about.
Take a piece of water-adhesive paper tape, spray a good coat of clear
poly over the adhesive.  Print on that with your printer.  Then give
it another coat of clear poly, cut it out, and it is ready to use.
I haven't tried it; has anyone?

Mike Schoeppner

(Message sent Wed, 13 Jan 2010 08:00:51 -0800 (PST) , from time zone -0800.)

Key Words in Subject:  Decals, Making, Simple

Related by Subject:
2010.01.13.07 (This article) - Making Simple Decals
2025.07.05.03 - Audio-To-MIDI Transcriptions For Making Piano Rolls
from Piotr Barcz
2024.01.25.02 - Making Wurlitzer Unit Valves
from Wallace Venable
2024.01.24.03 - Making Wurlitzer Unit Valves
from Jeff Kunkel
2022.03.19.01 - Paper Tape Marking Pen and Transport Kit
from Mark Kinsler
2021.03.25.01 - Video: The Making of the Seabreeze Carousel
from Matthew Caulfield
2021.03.25.05 - FS: Tools for Making Barrels for Barrel Organs
from Anatoly Zayaruzny
2021.03.24.01 - Video: The Making of the Seabreeze Carousel
from Andrew Lardieri
2020.12.26.03 - Making Wurlitzer Unit Valves
from Don Teach
2020.08.13.03 - Making Chime Rods
from Karl Schröder
2020.08.11.03 - Making Chime Rods For Chiming Clocks
from Mark Kinsler
2019.10.28.02 - Making Wurlitzer Band Organs Play Caliola Rolls
from Glenn Thomas