MMD > Archives > January 2017 > 2017.01.13 > 06Prev  Next


Applying Varnish Transfer Decals
By Nathan Woodhull 

About 20 years ago I found the correct way to apply varnish transfer
decals.  I contacted the Meyercord Co. in Carol Stream, Illinois.
They provided me with detailed instructions and a can of their J-28
solvent.  This has enabled me to apply varnish transfer decals
flawlessly and the cost of the decals was only $2.00 each.

Nathan "Skip" Woodhull - S-K Piano
Lima, Ohio

(Message sent Thu, 12 Jan 2017 23:05:42 -0800 , from time zone -0800.)

Key Words in Subject:  Applying, Decals, Transfer, Varnish

Related by Subject:
2017.01.13.06 (This article) - Applying Varnish Transfer Decals
from Nathan Woodhull
2016.09.09.03 - Applying Pouch Sealants
from John A. Tuttle
2013.02.24.02 - Applying Graphite To Wood Surfaces
from John Taber
2013.02.23.03 - Applying Graphite to Wood Surfaces
from Pete Knobloch
2013.02.22.01 - Applying Graphite to Wood Surfaces
from Spencer Chase
2013.02.22.02 - Applying Graphite to Wood Surfaces
from Don Teach
2013.02.22.03 - Applying Graphite to Wood Surfaces
from Bruce Clark
2013.02.22.04 - Applying Graphite to Wood Surfaces
from Bob Loesch
2013.02.22.05 - Applying Graphite to Wood Surfaces
from Howard Wyman
2013.02.20.10 - Applying Graphite to Wood Surfaces
from Larry Schuette
2009.03.04.03 - Applying a Surface Coating on a Tracker Bar
from John Phillips
2009.01.08.07 - Applying a Surface Coating on a Tracker Bar
from Bruce Clark