Hi All, I am currently retubing a Duo-Art and am left with a slight
puzzle on the repeat switch.  All of the diagrams and instructions that
I have show a 4-port slider switch, but this one has a 3-port rotary
switch.  One connection is from the take up spool, another goes to the
Play/Reroll pneumatic under the keybed.  The third port has a copper
tee with two of the openings reduced to bleeds, the other normal 1/8th
inch tubing size with no connections obvious or noted on disassembly.

Can anyone help with where these last two connections from the tee
might go?  One bleed leads to the switch so am left with one bleed and
one 1/8th inch connection to establish.  Thanks in advance for any help.

Steve Dibble