Joseph Osborne asked for a source for a new rubber tire for
a Seeburg friction drive on a Seeburg E.  When I needed to replace
the rubber tire on my KT-Special, I bought part MS28775-435 from
O-Rings, Inc. ( http://www.oringsusa.com/ ).  This part is listed
as 5.75" ID x 6.25" OD x .25" wide.  It worked fine on my machine
and appeared to match exactly the one that had failed.

If the Seeburg E indeed needs a 3/8" diameter o-ring, I would recommend
buying that stock and making an o-ring by attaching the ends together
with a cyano adhesive ["super glue"].  If making one is the route
chosen, be careful not to buy silicone-based stock as that will not
adhere properly.  Another source for the stock would be McMaster-Carr.

Jack Breen

 [ At http://www.oringsusa.com/catalog/product_info.php?products_id=23002910
 [ MS28775 Military Nitrile ... Excellent resistance to tear and abrasion
 [ -- Robbie