| Digest Nr | Subject and Author |
|---|
 |
| 2022.02.28.04 | Ampico Perforator Punches Duo-Art Rolls, from Julian Dyer |
| 2022.02.28.03 | Ampico Perforator Punches Duo-Art Rolls, from Stephen Bentley |
| 2022.02.25.02 | Ampico Perforator Punches Duo-Art Rolls, from Eli Shahar |
| 2022.02.25.01 | Ampico Perforator Punches Duo-Art Rolls, from Spencer Chase |
| 2022.02.22.04 | Ampico Perforator Punches Duo-Art Rolls, from Ed Chaban |
| 2022.02.22.03 | Ampico Perforator Punches Duo-Art Rolls, from Niels Berkers |
| 2022.02.21.03 | Ampico Perforator Punches Duo-Art Rolls, from Spencer Chase |
| 2022.02.19.02 | Ampico Perforator Punches Duo-Art Rolls, from Robbie Rhodes |
| 2020.09.30.02 | Seek Machinist To Make Special Steel Valve Punches, from Dave Krall |
| 2017.01.25.03 | QRS Still Punches Rolls in Buffalo, New York, from Nancy Fratti |
| 2015.08.13.03 | Hand Punches for Piano Roll Repairs, from Spencer Chase |
| 2015.08.10.02 | Seek Hand Punches for Piano Roll Repairs, from Douglas Heckrotte |
| 2013.10.22.06 | Die Punches for Cutting Leather and Felt, from George Cooper |
| 2013.08.28.04 | Boehm Hollow Punches for Gaskets, from Jon Page |
| 2011.04.19.05 | Star Perforator Has 88 Punches, from Jean-Pierre Jouandet |
| 2009.05.16.10 | Source of Hand Punches, from Spencer Chase |
| 2007.02.04.11 | FS: Punches and Dies for Music Roll Perforator, from Ed Schmidt |
| 2004.12.30.09 | Hand Punches for Music Rolls, from Matthew Caulfield |
| 2004.12.30.08 | Source of Hand Punches, from Spencer Chase |
| 2000.11.07.12 | MIDster Punches Music Rolls From MIDI File, from Bob Essex |
| 1998.07.17.08 | Sharpening Arch Punches, from Stephen Kent Goodman |
| 1998.07.15.12 | Stencil Punches, from Andy Taylor |
| 1998.07.15.11 | Modifying Letter Punches for Stencil-cutting, from Matthew Caulfield |
| 1998.07.14.13 | Steel Punches for Stencil Cutting, from Andy LaTorre |
| 1998.07.11.09 | Steel Punches for Stencil Cutting, from Russ Doering |
| 1998.07.10.06 | Seek Stencil Alphabet Punches for Printing Words, from Andy Taylor |
| 1998.05.31.09 | Sharpening Arch and Tube Punches, from Stephen Kent Goodman |
| 1998.05.29.05 | Sharpening Arch and Tube Punches, from Richard Schneider |
| 1998.05.29.04 | Sharpening Arch Punches -- The Easy Way, from Colin Hinz |
| 1998.05.28.08 | Sharpening Arch and Tube Punches, from Jon Page |
| 1998.05.28.07 | Sharpening Arch and Tube Punches, from Richard Vance |
| 1998.05.27.15 | Sharpening Arch and Tube Punches, from Spencer Chase |
| 1998.05.27.14 | Sharpening Arch and Tube Punches, from Karl Petersen |
| 1998.05.27.13 | Sharpening Arch and Tube Punches, from Walt Kehoe |
| 1998.05.26.10 | Sharpening Arch and Tube Punches, from Stephen Kent Goodman |
| 1998.03.02.18 | Osborn Punches and Forstner Drill Bits, from Don Teach |
| 1998.03.01.11 | Punches, from D. L. Bullock |
| 1998.02.27.08 | Arch Punches, from Larry Broadmoore |
| 1998.02.26.14 | Supplier of Punches Found, from Sam Harris |
| 1998.02.06.17 | Arch Punches, from Don Teach |
| 1998.02.05.07 | Arch Punches, from Colin Hinz |
| 1998.02.05.06 | Arch Punches, from Andy LaTorre |
| 1998.02.04.22 | Arch Punches & Rotary Punch, from John A. Tuttle |
| 1998.02.04.21 | Leather Punches, from Nelson Denton |
| 1998.02.03.07 | Seek Leather Punches, from Sam Harris |
| 1996.12.23.03 | Sewing Machine Punches Paper, from Bruce Clark |
| 1995.05.16.08 | Software, Punches, and MIDI, from Jody Kravitz |
| 1995.05.16.04 | Software and punches..., from Dave Clark |
|
