Unknown Music Roll Is For Wurlitzer Concert Organ
By Russ Doering
Bill Klinger wrote in 030925 MMDigest:
> The roll holder has 4-1/4" aluminum hubs. The drive end has a short
> hub and a 3/8" diameter recess for a 1/8" flat blade drive. The other
> end of the shaft is threaded with a collar and spring inside the core,
> and a 3/16" rounded-end pin projecting about 3/8". This hub presses
> down on the spring and a knurled brass nut holds it in place against
> the end of the roll. The whole assembly is about 12-1/2" wide, pin
> end to recess hub.
Hi Bill and List, My guess is a Wurlitzer Concert Organ Roll.
[ See the tables of Wurlitzer Residence Organ Rolls near the bottom
[ of http://mmd.foxtail.com/MMD/MMMedia/identifying.html
[ -- Robbie
(Message sent Mon 29 Sep 2003, 08:58:19 GMT, from time zone GMT-0400.)