MMD > Archives > February 1999 > 1999.02.15 > 11Prev  Next


Gluing Cloth on Pump Bellows
By Damon Atchison 

On a small organ I'm working on now the supply bellows and the reservoir
are all sharing one piece of wood.  Hence, I have 3 pieces of wood to
make 2 supply bellows and 1/2 a reservoir.

How do I glue the cloth on correctly, with achieving the right span at
the same time?  I'm finding this very difficult.  Those of you who have
rebuilt Aeolian pumps know what I'm talking about.

Damon Atchison
Damon66@juno.com

(Message sent Mon, 15 Feb 1999 21:12:24 -0500 , from time zone -0500.)

Key Words in Subject:  Bellows, Cloth, Gluing, Pump

Related by Subject:
1999.02.15.11 (This article) - Gluing Cloth on Pump Bellows
2025.02.18.02 - Gluing Pneumatics to the Stack
from Eliyahu Shahar
2025.02.17.02 - Gluing Pneumatics to the Stack: Options
from David Dewey
2018.04.09.05 - Gluing Book-cloth Leaders to Dry-waxed Paper
from Dave Krall
2014.01.20.07 - Gluing Bellows Without Hinges
from David Dewey
2013.08.24.04 - Kimball Valve Gluing Questions
from Don Gehrke
2012.07.26.05 - Gluing Leather to Rubberized Cloth
from John Phillips
2012.07.26.06 - Gluing Leather to Rubberized Cloth
from Bill Maguire
2012.07.24.06 - Gluing Leather to Rubberized Cloth
from David Price
2010.11.10.06 - Gluing the Piano Roll Spool Flange
from Larry Norman
2010.11.10.07 - Not Gluing the Piano Roll Spool Flange
from Bruce Grimes
2010.11.09.07 - Gluing the Piano Roll Left Spool Flange
from John A. Tuttle