MMD > Archives > November 2007 > 2007.11.17 > 13Prev  Next


Mills Violano With Cracked Harp Plate
By Rodney Diehl 

We have used the "metal stitching" method to repair cast iron machinery
parts.  Usually they are as strong as new.  The method is described
here: http://www.locknstitch.com/Metal_Stitching.htm.

Rodney (The Destroyer) Diehl

(Message sent Fri, 16 Nov 2007 20:55:38 EST , from time zone -0500.)

Key Words in Subject:  Cracked, Harp, Mills, Plate, Violano

Related by Subject:
2008.02.15.03 - Mills Violano With Cracked Harp Plate
from Brad Hunter
2007.11.30.06 - Mills Violano With Cracked Harp Plate
from Steve Bentley
2007.11.29.05 - Mills Violano With Cracked Harp Plate
from Brad Hunter
2007.11.21.06 - Mills Violano With Cracked Harp Plate
from Larry Mayo
2007.11.18.10 - Mills Violano With Cracked Harp Plate
from Kim Bunker
2007.11.17.12 - Mills Violano With Cracked Harp Plate
from Rob Goodale
2007.11.17.13 (This article) - Mills Violano With Cracked Harp Plate
from Rodney Diehl
2007.11.16.05 - Mills Violano With Cracked Harp Plate
from Mark Kinsler
2007.11.15.06 - Mills Violano With Cracked Harp Plate
from Bob Conant
2007.11.15.07 - Mills Violano With Cracked Harp Plate
from Ed Gloeggler
2007.11.15.08 - Mills Violano With Cracked Harp Plate
from Howard Wyman
2007.11.15.09 - Mills Violano With Cracked Harp Plate
from Mark Kinsler