Bridge Repairs
By Jon Page
> <Snip>
>
> the bass bridge is still firmly glued to the soundboard yet has to be
> replaced because of a 'zipper' crack along the bridge pins. Any ideas
> on how to go about this without damaging the soundboard?
Route the top of the bridge off and apply a cap. Rig a template: a piece of plywood with the area of the bridge sawed out can be used to guide the router. I've used this method many times.
~~~~~~~~~~~~~~
Jon Page
Cape Cod. Mass
~~~~~~~~~~~~~~ |
(Message sent Tue 5 Nov 1996, 13:00:14 GMT, from time zone GMT-0500.) |
|
