MMD > Archives > May 2011 > 2011.05.14 > 06Prev  Next


Schematic for Recordo System
By Hal Klassen

Replying to David Dunn's note in the 110512 MMD, the Recordo does not
need an on/off switch, since all the expression holes are beyond a
normal tracker bar.  The rewind hole, as I'm sure you know, is the
farthest right on the left side.

On my piano there is a replay switch and the tubing is a bit
complicated.  I wouldn't bother with this, as the replay is quite
brutal: the roll is rewinding fast and it grinds the gears when going
back into play.

There were at least four different Recordo systems, and I have several
tubing diagrams which I can scan and send to David.  What is the
approximate year, and is it an upright?

Hal Klassen
Coquitlam, B.C.


(Message sent Sat 14 May 2011, 17:05:32 GMT, from time zone GMT-0700.)

Key Words in Subject:  Recordo, Schematic, System
Enter text below to search the MMD Website with Google

Please Support Publication of the MMD with your Generous Donation
No PayPal account required
SSL Certificate
by
Let's Encrypt