| Digest Nr | Subject and Author |
|---|
 |
| 2019.03.25.02 | Seek Mason & Hamlin 6'2" Flange Finger Ampico, from Mike Walter |
| 2017.02.11.02 | Seek Flange For 1-1/8" Ampico Tubing, from Bob Stewart |
| 2014.11.18.07 | Seek Cast Iron Pedal Lyre Mounting Flange, from Glenn Roat |
| 2014.06.14.03 | Seek Crank Flange, from Claudine Jones |
| 2013.03.10.09 | Seek Flange for Seeburg G-roll Spool, from Tim Johnson |
| 2011.03.27.05 | Ampico Flange on Welte Licensee Roll, from David Dewey |
| 2010.11.10.07 | Not Gluing the Piano Roll Spool Flange, from Bruce Grimes |
| 2010.11.10.06 | Gluing the Piano Roll Spool Flange, from Larry Norman |
| 2010.11.09.07 | Gluing the Piano Roll Left Spool Flange, from John A. Tuttle |
| 2010.11.08.11 | Gluing the Piano Roll Spool Flange, from Steve Marx |
| 2007.01.17.04 | Pianola 65-note Spool Flange Dimensions, from Niels Berkers |
| 2005.09.11.09 | Rubber Band as Spool Flange Spacer, from Tom Hutchinson |
| 2005.09.11.06 | Seek Cremona Roll Flange, from John Kirin |
| 2004.11.09.01 | Deformed Spool Flange Causes Tracking Problem, from Jerry F. Bacon |
| 2004.04.14.07 | Dimensions of "88-note" Spool Flange & Chuck, from Walter Tenten |
| 2003.03.06.02 | Piano Rolls With Square Drive Hole in Flange, from Christofer Noering |
| 2003.03.05.05 | Piano Rolls With Square Drive Hole in Flange, from Christofer Noering |
| 2003.03.05.04 | Piano Rolls With Square Drive Hole in Flange, from Nicholas Simons |
| 2003.03.04.07 | Piano Rolls With Square Drive Hole in Flange, from Tom Hawthorn |
| 2002.09.07.07 | Seek Simplex Flange Finger Wires, from John A. Tuttle |
| 2002.06.06.08 | 1925 Ampico Grand Flange Finger Type Amphion Player Model "A", from Don Taylor |
| 2001.01.17.05 | Loose Jack Flange Center Pin, from Roger Waring |
| 2001.01.16.12 | Loose Jack Flange Center Pin, from David A. Vanderhoofven |
| 2001.01.16.11 | Loose Jack Flange Center Pin, from Bruce Clark |
| 2001.01.16.10 | Loose Jack Flange Center Pin, from Roger Waring |
| 2001.01.16.09 | Loose Jack Flange Center Pin, from Jurgen Goering |
| 2001.01.15.05 | Securing Jack Flange Pin, from Karl Ellison |
| 2000.12.15.10 | Repairing Brass Hammer Flange Rail, from Bill Maxim |
| 2000.12.10.02 | Seek Brass Hammer Flange Rail For Knabe Upright, from Iran Ausley |
| 2000.04.13.07 | Dimensions of "American Standard" Spool Flange, from John Phillips |
| 1998.04.21.16 | Spool Flange Materials, from Matthew Caulfield |
|
