| Digest Nr | Subject and Author |
|---|
 |
| 2025.03.01.02 |
Seek 3 Feet of 19 Gauge Piano Wire, from Jim Quashnock |
| 2025.02.26.02 |
Seek 3 Feet of 19 Gauge Piano Wire, from David Krall |
| 2024.03.30.01 |
Seek Wire Valve Stems for Autopiano Action, from Floyd Chamberlain |
| 2024.01.08.01 |
Flattened Wire Stock For Angle Brackets, from Wallace Venable |
| 2024.01.07.01 |
Flattened Wire Stock For Angle Brackets, from Bill Klinger |
| 2013.11.06.03 |
Strange Wire in Steamboat Pump Cradle, from John Phillips |
| 2013.02.22.07 |
Thread Rolling Machine for Wire Push Rods, from John Farmer |
| 2013.02.20.07 |
Thread Rolling Machine for Wire Push Rods, from Spencer Chase |
| 2013.02.18.05 |
Thread Rolling Machine for Wire Push Rods, from Nick Dean |
| 2013.02.17.03 |
Thread Rolling Machine for Wire Push Rods, from Douglas Heffer |
| 2013.02.16.06 |
Thread Rolling Machine for Wire Push Rods, from Don Teach |
| 2013.02.16.05 |
Thread Rolling Machine for Wire Push Rods, from Spencer Chase |
| 2013.02.16.04 |
Thread Rolling Machine for Wire Push Rods, from Dennis Mead |
| 2013.02.15.02 |
Seek Thread Rolling Machine for Wire Push Rods, from Jay Travis |
| 2009.08.22.04 |
Threaded Wire for Screw Eye Adjusters, from Nicholas Simons |
| 2009.07.11.04 |
Making Brass Flat Wire for Organ Barrel Pins, from Duaine Hechler |
| 2009.07.11.03 |
Making Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.07.10.02 |
Brass Flat Wire for Organ Barrel Pins, from David Evans |
| 2009.07.08.03 |
Brass Flat Wire for Organ Barrel Pins, from Spencer Chase |
| 2009.07.07.01 |
Brass Flat Wire for Organ Barrel Pins, from Derek Deane |
| 2009.07.06.02 |
Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.07.04.02 |
Seek Brass Flat Wire for Organ Barrel Pins, from Serge Robillard |
| 2009.03.29.05 |
Seek Spring Wire for Organ Pallet Valve Springs, from Roger Wiegand |
| 2006.08.29.06 |
Source of Brass Spring Wire, from Marvin Zeigler |
| 2006.08.19.04 |
Seek Brass Spring Wire, from Mike Walter |
| 2005.01.13.06 |
Repairing a Barrel Piano: Wire Gauge, from Andrew Leach |
| 2005.01.12.08 |
Repairing a Barrel Piano: Wire Gauge, from D. L. Bullock |
| 2004.04.13.08 |
Cloth-covered Electric Wire, from Stephen Kent Goodman |
| 2004.04.12.11 |
Cloth-covered Electric Wire, from Ed Kigler |
| 2004.04.09.09 |
Source of Cloth-covered Electric Wire, from Stephen Kent Goodman |
| 2004.03.05.05 |
Wire For Cleaning Small Holes, from Tom Lear |
| 2003.12.31.06 |
Source of Roeslau Piano Wire, from Jan Kijlstra |
| 2003.12.10.03 |
Seek Quality Piano Wire, from Bill Maguire |
| 2003.01.07.04 |
Seek Wire Hooks for Winklemann Player Action, from Roger Waring |
| 2002.10.22.04 |
Rectangular Wire for Barrel Pins, from Andrew Pilmer |
| 2002.04.03.02 |
Music Wire & Cast Piano Plate, from Mark Kinsler |
| 2002.04.02.08 |
Physics of Music Wire, from Craig Brougher |
| 2001.04.25.02 |
Magnet Wire Specifications, from Donald Dusenbury |
| 2001.04.24.03 |
Source of Magnet Wire, from Andy LaTorre |
| 2000.09.28.10 |
Seek .062" Music Wire for Desk Chime, from Mike Fisher |
| 2000.01.16.10 |
Making a Wire Knot in a Piano String, from Jon Page |
| 2000.01.15.08 |
Making a Wire Knot in a Piano String, from John A. Tuttle |
| 1999.10.02.14 |
Seek Monkey Organ & Wire Recorder Supplies, from Brian Sanderson |
| 1999.07.27.10 |
Transferring Wire Recording to Audio Cassette, from John A. Tuttle |
| 1999.07.27.09 |
Clarence Hickman #4 - Straightening Music Wire, from James L. Brady |
| 1999.07.24.04 |
Wire Recordings, from John A. Tuttle |
| 1999.07.23.06 |
Lear Inc. Wire Recorder, from Albert de Boer |
| 1999.02.02.10 |
Music Wire Fingers for Cheap Roll Reader, from John Kleinbauer |
| 1999.01.30.18 |
Hot Wire Airflow Sensor for Pneumatic Reader, from Richard Tonnesen |
| 1997.09.16.11 |
Seek Thread-cutting Die for Push-rod Wire, from Jon Page |
| 1997.08.30.07 |
Pin Wire for Music Box Cylinder Repinning, from Bob Van Sickle |
| 1997.08.18.12 |
Piano Wire, from Bernt Damm |
| 1997.08.17.12 |
German Piano Wire (Hickman), from Robbie Rhodes |
| 1997.07.25.05 |
Hole-Sensing With Wire Brushes, from Andy LaTorre |
| 1997.07.24.06 |
Hole-Sensing With Wire Brushes, from Roger Waring |
| 1996.05.03.08 |
Re: correction, Wire Size Calculations, from Craig Brougher |
| 1996.05.03.07 |
Wire Size Calculations, from Craig Brougher |
| 1996.04.30.02 |
Re: Wire Size Calculations, from Douglas K. Rhodes |
| 1996.04.28.05 |
Re: Wire size calculations, from Douglas K. Rhodes |
| 1996.04.25.07 |
Re: Wire Size Calculation, from Douglas K. Rhodes |
| 1996.04.25.06 |
Re: Wire Size Calculations, Restringing Scales, from Bill Chapman |
| 1996.04.25.05 |
Re: Wire Size Calculation: Treble Strings, from Craig Brougher |
| 1996.04.25.04 |
Re: Wire Size Calculation: Bass Strings, from Craig Brougher |
| 1996.04.24.01 |
Re: Wire Size Calculations, from Terry Smythe |
| 1996.04.23.07 |
Re: Wire Size Calculations, from Fritz Gellerman |
| 1996.04.23.06 |
Re: Wire Size Calculations, from Douglas K. Rhodes |
| 1996.04.23.05 |
Re: Wire Size Calculations, from Bob Conant |
| 1996.04.23.04 |
Re: Wire Size Calculations, from Larry Fisher |
| 1996.04.23.03 |
Re: Wire Size Calculations, from Craig Brougher |
| 1996.04.22.01 |
Wire Size Calculations for Restringing, from Terry Smythe |
|
