| Digest Nr | Subject and Author |
|---|
 |
| 2023.03.14.07 |
FS: New QRS Piano Roll Tubes and Flanges, from RJ Ingram |
| 2021.06.06.04 |
3D Printing of Piano Roll Spool Flanges, from Marshall Jose |
| 2021.01.22.04 |
3D Printing of Ampico Jumbo Spool Flanges, from Mike Nicholls |
| 2020.12.16.04 |
3D Printing of Piano Roll Spool Flanges, from Rich Sitler |
| 2020.12.12.03 |
3D Printing of Piano Roll Spool Flanges, from Jon Page |
| 2020.12.09.02 |
3D Printing of Piano Roll Spool Flanges, from Piotr Barcz |
| 2020.12.05.01 |
3D Printing of Piano Roll Spool Flanges, from Ian Hamilton |
| 2017.05.31.02 |
Seek "Medium" 88-note Roll Flanges, from Brian Thornton |
| 2017.02.28.04 |
Removing Piano Roll Flanges Nondestructively, from Bill Koenigsberg |
| 2015.08.23.02 |
Ampico Lost Motion Lifting Flanges, from D. L. Bullock |
| 2015.08.21.03 |
Seek Ampico Lost Motion Lifting Flanges, from Deidre Dixon |
| 2014.12.25.01 |
Plastic Spool Flanges for Music Rolls, from Tom Hutchinson |
| 2014.12.24.02 |
Plastic Spool Flanges for Music Rolls, from Ed Gaida |
| 2014.06.30.04 |
Repairing Pot Metal Flanges and Elbows, from Alan Douglas |
| 2014.06.25.09 |
Repairing Pot Metal Flanges and Elbows, from Jon Page |
| 2014.06.25.08 |
Repairing Pot Metal Flanges and Elbows, from Bob Hodge |
| 2014.06.23.08 |
Repairing Pot Metal Flanges and Elbows, from Keith Reedman |
| 2014.06.23.07 |
Repairing Pot Metal Flanges and Elbows, from Craig Smith |
| 2014.06.23.06 |
Repairing Pot Metal Flanges and Elbows, from David Dewey |
| 2014.06.23.05 |
Repairing Pot Metal Flanges and Elbows, from Don Teach |
| 2014.06.23.04 |
Repairing Pot Metal Flanges and Elbows, from John Grant |
| 2014.06.22.02 |
Repairing Pot Metal Flanges and Elbows, from Donald Barton |
| 2013.10.09.02 |
Seek Roll Flanges & Chuck for Nelson-Wiggen 4x, from Steve Dean |
| 2013.06.13.07 |
Sanding Warped Spool Flanges, from Dale F. Rowe |
| 2013.06.11.03 |
Seek Spools & Flanges for Welte Licensee Rolls, from Adam Aceto |
| 2013.03.16.02 |
QRS Rolls with Metal Flanges, from Claudine Jones |
| 2012.04.06.04 |
Ordering Small Piano Roll Flanges, from Bob Billings |
| 2011.12.29.05 |
Making Flanges for 65-note Music Roll Spools, from Greg Filardo |
| 2011.04.19.04 |
Odd 88-note Music Roll With 1-1/4" End Flanges, from Eric Stott |
| 2011.04.18.04 |
Odd 88-note Music Roll With 1-1/4" End Flanges, from Dale F. Rowe |
| 2011.04.17.02 |
Odd 88-note Music Roll With 1-1/4" End Flanges, from John A. Tuttle |
| 2010.05.25.06 |
Aeolian Rolls 11.38" Wide With Unusual Flanges, from Randolph Herr |
| 2008.08.24.06 |
Seek Ampico A Fingers and Flanges, from Tony Pignaloni |
| 2008.05.05.03 |
Flattening Distorted Spool Flanges, from John Phillips |
| 2008.03.31.02 |
Flattening Distorted Spool Flanges, from John Phillips |
| 2008.03.05.07 |
Seek Replacement Flanges for Piano Roll Spools, from Deane Wiley |
| 2006.10.31.05 |
Organ Roll Spool Flanges of Metal, from Gregory Filardo |
| 2006.10.29.07 |
Replicating Piano Roll Spool Flanges of Wood, from Philip Jamison |
| 2006.10.29.06 |
Organ Roll Spool Flanges of Metal, from Leslie Hoffman |
| 2005.12.06.04 |
FS: Pin-End Roll Flanges for 65-note Rolls, from Ed Gaida |
| 2005.09.09.03 |
Seek Finger Flanges for Welte Vorsetzer, from Joshua Rapier |
| 2005.03.04.09 |
Source of O-Rings for Piano Roll Flanges, from Jill Miller |
| 2005.03.03.15 |
Source of O-Rings for Piano Roll Flanges, from John Neiswinger |
| 2005.03.03.14 |
Source of O-Rings for Piano Roll Flanges, from Randolph Herr |
| 2005.03.02.08 |
Seek O-Rings for Piano Roll Flanges, from Tom Gregory |
| 2004.10.01.02 |
FS: Flanges & Tubes for Piano Roll Spools, from Lou Kretchek |
| 2004.05.07.07 |
10-3/8" Wide Music Rolls With Wood Flanges, from Rich Schommer |
| 2004.05.07.06 |
10-3/8" Wide Music Rolls With Wood Flanges, from D. L. Bullock |
| 2004.05.06.07 |
10-3/8" Wide Music Rolls With Wood Flanges, from Nicholas Simons |
| 2004.05.06.06 |
10-3/8" Wide Music Rolls With Wood Flanges, from Adam G. Ramet |
| 2004.05.05.04 |
Unknown Music Rolls With Wood Flanges, from Maggie Richardson |
| 2003.09.30.07 |
Ampico B Jumbo Roll Flanges of Metal, from Bruce Clark |
| 2003.09.30.06 |
Ampico B Jumbo Roll Flanges of Metal, from Ken Vinen |
| 2003.09.27.05 |
Ampico B Jumbo Roll Flanges of Metal, from Bob Stewart |
| 2002.07.31.09 |
Cleaning Rust From Metal Flanges, from John Phillips |
| 2002.07.30.11 |
Cleaning Rust From Metal Flanges, from Mike Frost |
| 2002.07.30.10 |
Cleaning Rust From Metal Flanges, from Ed Chaban |
| 2002.07.30.09 |
Cleaning Rust From Metal Flanges, from Claus Kucher |
| 2002.07.29.05 |
Cleaning Rust From Metal Flanges, from Paul Anderson |
| 2002.07.29.04 |
Cleaning Rust From Metal Flanges, from Ray Finch |
| 2002.07.28.04 |
Cleaning Rust From Metal Flanges, from Joyce Brite |
| 2000.08.08.12 |
Seek Thayer Hammer Shank Flanges, from Ana Gerard |
| 1999.05.14.04 |
Alignment and Repair of Pinned-end Roll Flanges, from Richard Vance |
| 1998.04.22.12 |
Black Shellac and Phenolic Spool Flanges, from Karl Petersen |
| 1998.04.22.11 |
QRS Shellac Spool Flanges, from Richard Vance |
| 1998.04.22.10 |
Black Shellac and Bakelite Spool Flanges, from Julian Dyer |
|
