| Digest Nr | Subject and Author |
|---|
 |
| 2023.03.29.03 | Seek Steel Pins from 65-note Roll Spool Ends, from John Grant |
| 2023.03.23.01 | Seek Steel Pins from 65-note Roll Spool Ends, from John Grant |
| 2014.01.09.03 | Replacing Pins In Music Box Cylinders, from Jim Weir |
| 2013.03.26.03 | Take-up Spool End Pins, from John A. Tuttle |
| 2013.02.04.07 | Fabricating Swaged Pins for Music Roll Spools, from John Grant |
| 2013.02.01.08 | Fabricating Swaged Pins for Music Roll Spools, from John A. Tuttle |
| 2012.12.03.05 | Guide Pins Align Pneumatics to Action Stack, from Bill Koenigsberg |
| 2012.12.01.04 | Guide Pins Align Pneumatics to Action Stack, from Don Teach |
| 2012.11.30.11 | Guide Pins Align Pneumatics to Action Stack, from Ken Vinen |
| 2012.11.30.10 | Guide Pins Align Pneumatics to Action Stack, from Stephen Toyne |
| 2012.11.30.09 | Guide Pins Align Pneumatics to Action Stack, from Gordon Stelter |
| 2012.11.29.03 | Guide Pins Align Pneumatics to Action Stack, from Bill Koenigsberg |
| 2011.08.12.05 | Loose Tuning Pins, from Marc Goodman |
| 2011.08.11.04 | Loose Tuning Pins, from Bernt Damm |
| 2011.08.10.07 | Loose Tuning Pins, from Jan Kijlstra |
| 2011.08.10.06 | Loose Tuning Pins, from Mark Ritzenhein |
| 2011.08.09.08 | Loose Tuning Pins, from Bill Maguire |
| 2011.08.09.07 | Loose Tuning Pins, from Mark Ritzenhein |
| 2011.08.09.06 | Loose Tuning Pins, from David Dunn |
| 2011.08.08.04 | Loose Tuning Pins, from Bryan Smith |
| 2011.03.11.08 | Blued vs. Plated Tuning Pins for Duo-Art, from Allen Scott |
| 2011.02.23.08 | Repairing Loose Tuning Pins, from Greg Graham |
| 2011.02.22.03 | Repairing Loose Tuning Pins, from Jan Kijlstra |
| 2011.02.21.06 | Repairing Loose Tuning Pins, from Rob Goodale |
| 2009.12.21.01 | Straightening Bent Cylinder Pins, from Mike Knudsen |
| 2009.12.20.02 | Straightening Bent Cylinder Pins, from Eliyahu Shahar |
| 2009.12.19.03 | Straightening Bent Cylinder Pins, from Chris Mitchell |
| 2009.12.18.02 | Straightening Bent Cylinder Pins, from Fred Neece |
| 2009.07.11.04 | Making Brass Flat Wire for Organ Barrel Pins, from Duaine Hechler |
| 2009.07.11.03 | Making Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.07.10.02 | Brass Flat Wire for Organ Barrel Pins, from David Evans |
| 2009.07.08.03 | Brass Flat Wire for Organ Barrel Pins, from Spencer Chase |
| 2009.07.07.01 | Brass Flat Wire for Organ Barrel Pins, from Derek Deane |
| 2009.07.06.02 | Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.07.04.02 | Seek Brass Flat Wire for Organ Barrel Pins, from Serge Robillard |
| 2007.07.26.03 | Source of Pins for Barrel Piano Cylinder, from Paul Baker |
| 2007.07.24.07 | Pins for Barrel Piano Cylinder, from Craig Smith |
| 2007.07.24.06 | Pins for Barrel Piano Cylinder, from Christian Greinacher |
| 2007.07.23.05 | Seek Pins for Barrel Piano Cylinder, from George Kiriakidis |
| 2006.05.06.04 | Seek Tool To Adjust Pins of Barrel Piano, from Rod Cornelius |
| 2002.10.22.04 | Rectangular Wire for Barrel Pins, from Andrew Pilmer |
| 2002.08.23.02 | Raking or Canting Music Box Cylinder Pins, from Albert de Boer |
| 2001.07.31.10 | Piano Tuning Pins Secured with Brass Wedges, from Donald Dusenbury |
| 2001.04.16.05 | Sticking Tuning Pins, from Steve Bentley |
| 2001.04.14.02 | Sticking Tuning Pins, from Roger Waring |
| 2001.04.10.09 | Strings Sticking at Bridge Pins, from C. Jim Cook |
| 2001.04.10.08 | Sticking Tuning Pins, from Richard Day |
| 2001.04.09.15 | Sticking Center Pins on Steinway Vertical Piano, from Eric Shoemaker |
| 2001.04.09.14 | Sticking Tuning Pins, from John A. Tuttle |
| 2001.04.08.09 | Sticking Tuning Pins, from Steve Bentley |
| 2001.04.07.11 | Sticking Center Pins on Steinway Vertical Piano, from Jon Page |
| 2001.04.07.10 | Sticking Center Pins on Steinway Vertical Piano, from Herb Lindahl |
| 2001.04.07.09 | Sticking Center Pins on Steinway Vertical Piano, from Spencer Chase |
| 2001.04.07.08 | Sticking Center Pins on Steinway Vertical Piano, from Bruce Clark |
| 2001.04.06.08 | Sticking Center Pins on Steinway Vertical Piano, from Randolph Herr |
| 2001.04.05.08 | Repairing Loose Key Pins, from John A. Tuttle |
| 2001.04.05.07 | Repairing Loose Key Pins, from Jon Page |
| 2001.04.03.04 | Loose Key Pins, from Benjamin Haass |
| 2000.05.30.07 | Gold-Plated Tuning Pins, from Dave McMaster |
| 2000.05.23.07 | Nickel-Plated vs. Blued Steel Tuning Pins, from D. L. Bullock |
| 2000.05.23.06 | Nickel-Plated vs. Blued Steel Tuning Pins, from Andy Taylor |
| 2000.05.22.17 | Nickel-Plated vs. Blued Steel Tuning Pins, from Eric Shoemaker |
| 2000.05.20.08 | Nickel-Plated vs. Blued Steel Tuning Pins, from Dave Smith |
| 2000.04.08.02 | Seek Lapel Pins Showing Organs, from Wolfgang Brommer |
| 2000.02.16.16 | Tuning Pins Slipping Resolved, from Andy Taylor |
| 2000.02.10.07 | Loose Tuning Pins, from Dan Armstrong |
| 2000.02.09.09 | Humidity Control & Loose Tuning Pins, from D. L. Bullock |
| 2000.02.07.06 | Tuning Pins Slipping in Winter, from Andy Taylor |
| 2000.02.06.10 | Sandpaper for Loose Tuning Pins, from Richard Day |
| 2000.02.06.09 | Loose Tuning Pins, from Hal Davis |
| 1999.08.04.11 | Superglue For Loose Tuning Pins, from Mark Pleatman |
| 1999.08.01.08 | Seek Steel Pins for Italian Barrel Piano, from Christian Greinacher |
| 1999.05.01.07 | Tight Tuning Pins, from Jurgen Goering |
| 1999.04.30.06 | Tight Tuning Pins, from Richard Day |
| 1999.04.29.08 | Tight Tuning Pins, from Craig Brougher |
| 1999.04.28.05 | Tight Tuning Pins, from Bruce Clark |
| 1999.01.26.05 | Seek Help With Cremona Balance Rail Key Pins, from Randy Hayno |
| 1998.06.24.01 | Replacing Cylinder Music Box Pins, from Les Plagmann |
| 1998.06.22.08 | Replacing Pins In Music Box Cylinders, from Dan Wilson |
| 1998.06.22.07 | Replacing Pins In Music Box Cylinders, from Reg Smith |
| 1998.06.21.06 | Replacing Pins In Music Box Cylinders, from Albert de Boer |
| 1998.06.21.05 | Replacing Pins In Music Box Cylinders, from Larry Greenfield |
| 1998.06.20.03 | Replacing Pins In Music Box Cylinders, from Scott Olson |
| 1998.06.20.02 | Replacing Pins In Music Box Cylinders, from Jerry Stanley |
| 1998.06.20.01 | Replacing Pins In Music Box Cylinders, from Albert de Boer |
| 1998.06.19.03 | Replacing Pins In Music Box Cylinders, from Dan Wilson |
| 1998.06.18.02 | Replacing Pins In Music Box Cylinders, from Les Plagmann |
| 1998.05.08.22 | Escutcheon Pins, from Don Teach |
| 1998.05.07.15 | Source for Escutcheon Pins & Screws, from Richard Schneider |
| 1998.05.06.23 | Escutcheon Pins, from Herbert Miller |
| 1997.09.04.02 | Making Brass Escutcheons and Pins, from Bob Conant |
| 1997.03.05.18 | Loose Tuning Pins & Pin-Tite, from Charles Flaum |
| 1997.03.03.23 | Loose Tuning Pins, from Roger Waring |
| 1997.03.03.22 | Loose Tuning Pins, from Craig Brougher |
| 1997.03.02.12 | Loose Tuning Pins, from John A. Tuttle |
| 1997.03.02.11 | Loose Tuning Pins, from Bruce Clark |
| 1997.03.02.10 | Loose Tuning Pins, from Charles Flaum |
| 1997.03.02.09 | Loose Tuning Pins, from Brett Mohr |
| 1997.03.01.11 | Loose Tuning Pins, from Craig Brougher |
| 1997.03.01.10 | Loose Tuning Pins, from Peter Neilson |
| 1997.02.28.12 | Loose Tuning Pins, from Charles Flaum |
| 1997.02.27.12 | Loose Tuning Pins, from Tom Steuer |
| 1997.02.26.14 | Loose Tuning Pins, from Troy Taylor |
| 1996.12.03.16 | Oversize Pins and Mandolin Bars, from Damon Atchison |
| 1996.11.20.16 | Bridge Pins Again, from Jon Page |
| 1996.11.18.05 | Bridge Pins Again, from Larry Mayo |
| 1996.11.17.05 | Re: 7/8 Inch Bridge Pins, from Jon Page |
| 1996.11.16.07 | Where Can I Buy 7/8 Inch Bridge Pins?, from Larry Mayo |
| 1996.11.09.07 | Epoxied Bridge Pins, from Craig Brougher |
| 1996.11.07.12 | Bridge Pins, from Richard Moody |
| 1996.11.05.11 | Bridge Pins, from Larry Mayo |
|
