| Digest Nr | Subject and Author |
|---|
 |
| 2023.03.29.03 |
Seek Steel Pins from 65-note Roll Spool Ends, from John Grant |
| 2023.03.23.01 |
Seek Steel Pins from 65-note Roll Spool Ends, from John Grant |
| 2014.01.09.03 |
Replacing Pins In Music Box Cylinders, from Jim Weir |
| 2013.03.26.03 |
Take-up Spool End Pins, from John A. Tuttle |
| 2013.02.04.07 |
Fabricating Swaged Pins for Music Roll Spools, from John Grant |
| 2013.02.01.08 |
Fabricating Swaged Pins for Music Roll Spools, from John A. Tuttle |
| 2012.12.03.05 |
Guide Pins Align Pneumatics to Action Stack, from Bill Koenigsberg |
| 2012.12.01.04 |
Guide Pins Align Pneumatics to Action Stack, from Don Teach |
| 2012.11.30.11 |
Guide Pins Align Pneumatics to Action Stack, from Ken Vinen |
| 2012.11.30.10 |
Guide Pins Align Pneumatics to Action Stack, from Stephen Toyne |
| 2012.11.30.09 |
Guide Pins Align Pneumatics to Action Stack, from Gordon Stelter |
| 2012.11.29.03 |
Guide Pins Align Pneumatics to Action Stack, from Bill Koenigsberg |
| 2011.08.12.05 |
Loose Tuning Pins, from Marc Goodman |
| 2011.08.11.04 |
Loose Tuning Pins, from Bernt Damm |
| 2011.08.10.07 |
Loose Tuning Pins, from Jan Kijlstra |
| 2011.08.10.06 |
Loose Tuning Pins, from Mark Ritzenhein |
| 2011.08.09.08 |
Loose Tuning Pins, from Bill Maguire |
| 2011.08.09.07 |
Loose Tuning Pins, from Mark Ritzenhein |
| 2011.08.09.06 |
Loose Tuning Pins, from David Dunn |
| 2011.08.08.04 |
Loose Tuning Pins, from Bryan Smith |
| 2011.03.11.08 |
Blued vs. Plated Tuning Pins for Duo-Art, from Allen Scott |
| 2011.02.23.08 |
Repairing Loose Tuning Pins, from Greg Graham |
| 2011.02.22.03 |
Repairing Loose Tuning Pins, from Jan Kijlstra |
| 2011.02.21.06 |
Repairing Loose Tuning Pins, from Rob Goodale |
| 2009.12.21.01 |
Straightening Bent Cylinder Pins, from Mike Knudsen |
| 2009.12.20.02 |
Straightening Bent Cylinder Pins, from Eliyahu Shahar |
| 2009.12.19.03 |
Straightening Bent Cylinder Pins, from Chris Mitchell |
| 2009.12.18.02 |
Straightening Bent Cylinder Pins, from Fred Neece |
| 2009.07.11.04 |
Making Brass Flat Wire for Organ Barrel Pins, from Duaine Hechler |
| 2009.07.11.03 |
Making Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.07.10.02 |
Brass Flat Wire for Organ Barrel Pins, from David Evans |
| 2009.07.08.03 |
Brass Flat Wire for Organ Barrel Pins, from Spencer Chase |
| 2009.07.07.01 |
Brass Flat Wire for Organ Barrel Pins, from Derek Deane |
| 2009.07.06.02 |
Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.07.04.02 |
Seek Brass Flat Wire for Organ Barrel Pins, from Serge Robillard |
| 2007.07.26.03 |
Source of Pins for Barrel Piano Cylinder, from Paul Baker |
| 2007.07.24.07 |
Pins for Barrel Piano Cylinder, from Craig Smith |
| 2007.07.24.06 |
Pins for Barrel Piano Cylinder, from Christian Greinacher |
| 2007.07.23.05 |
Seek Pins for Barrel Piano Cylinder, from George Kiriakidis |
| 2006.05.06.04 |
Seek Tool To Adjust Pins of Barrel Piano, from Rod Cornelius |
| 2002.10.22.04 |
Rectangular Wire for Barrel Pins, from Andrew Pilmer |
| 2002.08.23.02 |
Raking or Canting Music Box Cylinder Pins, from Albert de Boer |
| 2001.07.31.10 |
Piano Tuning Pins Secured with Brass Wedges, from Donald Dusenbury |
| 2001.04.16.05 |
Sticking Tuning Pins, from Steve Bentley |
| 2001.04.14.02 |
Sticking Tuning Pins, from Roger Waring |
| 2001.04.10.09 |
Strings Sticking at Bridge Pins, from C. Jim Cook |
| 2001.04.10.08 |
Sticking Tuning Pins, from Richard Day |
| 2001.04.09.15 |
Sticking Center Pins on Steinway Vertical Piano, from Eric Shoemaker |
| 2001.04.09.14 |
Sticking Tuning Pins, from John A. Tuttle |
| 2001.04.08.09 |
Sticking Tuning Pins, from Steve Bentley |
| 2001.04.07.11 |
Sticking Center Pins on Steinway Vertical Piano, from Jon Page |
| 2001.04.07.10 |
Sticking Center Pins on Steinway Vertical Piano, from Herb Lindahl |
| 2001.04.07.09 |
Sticking Center Pins on Steinway Vertical Piano, from Spencer Chase |
| 2001.04.07.08 |
Sticking Center Pins on Steinway Vertical Piano, from Bruce Clark |
| 2001.04.06.08 |
Sticking Center Pins on Steinway Vertical Piano, from Randolph Herr |
| 2001.04.05.08 |
Repairing Loose Key Pins, from John A. Tuttle |
| 2001.04.05.07 |
Repairing Loose Key Pins, from Jon Page |
| 2001.04.03.04 |
Loose Key Pins, from Benjamin Haass |
| 2000.05.30.07 |
Gold-Plated Tuning Pins, from Dave McMaster |
| 2000.05.23.07 |
Nickel-Plated vs. Blued Steel Tuning Pins, from D. L. Bullock |
| 2000.05.23.06 |
Nickel-Plated vs. Blued Steel Tuning Pins, from Andy Taylor |
| 2000.05.22.17 |
Nickel-Plated vs. Blued Steel Tuning Pins, from Eric Shoemaker |
| 2000.05.20.08 |
Nickel-Plated vs. Blued Steel Tuning Pins, from Dave Smith |
| 2000.04.08.02 |
Seek Lapel Pins Showing Organs, from Wolfgang Brommer |
| 2000.02.16.16 |
Tuning Pins Slipping Resolved, from Andy Taylor |
| 2000.02.10.07 |
Loose Tuning Pins, from Dan Armstrong |
| 2000.02.09.09 |
Humidity Control & Loose Tuning Pins, from D. L. Bullock |
| 2000.02.07.06 |
Tuning Pins Slipping in Winter, from Andy Taylor |
| 2000.02.06.10 |
Sandpaper for Loose Tuning Pins, from Richard Day |
| 2000.02.06.09 |
Loose Tuning Pins, from Hal Davis |
| 1999.08.04.11 |
Superglue For Loose Tuning Pins, from Mark Pleatman |
| 1999.08.01.08 |
Seek Steel Pins for Italian Barrel Piano, from Christian Greinacher |
| 1999.05.01.07 |
Tight Tuning Pins, from Jurgen Goering |
| 1999.04.30.06 |
Tight Tuning Pins, from Richard Day |
| 1999.04.29.08 |
Tight Tuning Pins, from Craig Brougher |
| 1999.04.28.05 |
Tight Tuning Pins, from Bruce Clark |
| 1999.01.26.05 |
Seek Help With Cremona Balance Rail Key Pins, from Randy Hayno |
| 1998.06.24.01 |
Replacing Cylinder Music Box Pins, from Les Plagmann |
| 1998.06.22.08 |
Replacing Pins In Music Box Cylinders, from Dan Wilson |
| 1998.06.22.07 |
Replacing Pins In Music Box Cylinders, from Reg Smith |
| 1998.06.21.06 |
Replacing Pins In Music Box Cylinders, from Albert de Boer |
| 1998.06.21.05 |
Replacing Pins In Music Box Cylinders, from Larry Greenfield |
| 1998.06.20.03 |
Replacing Pins In Music Box Cylinders, from Scott Olson |
| 1998.06.20.02 |
Replacing Pins In Music Box Cylinders, from Jerry Stanley |
| 1998.06.20.01 |
Replacing Pins In Music Box Cylinders, from Albert de Boer |
| 1998.06.19.03 |
Replacing Pins In Music Box Cylinders, from Dan Wilson |
| 1998.06.18.02 |
Replacing Pins In Music Box Cylinders, from Les Plagmann |
| 1998.05.08.22 |
Escutcheon Pins, from Don Teach |
| 1998.05.07.15 |
Source for Escutcheon Pins & Screws, from Richard Schneider |
| 1998.05.06.23 |
Escutcheon Pins, from Herbert Miller |
| 1997.09.04.02 |
Making Brass Escutcheons and Pins, from Bob Conant |
| 1997.03.05.18 |
Loose Tuning Pins & Pin-Tite, from Charles Flaum |
| 1997.03.03.23 |
Loose Tuning Pins, from Roger Waring |
| 1997.03.03.22 |
Loose Tuning Pins, from Craig Brougher |
| 1997.03.02.12 |
Loose Tuning Pins, from John A. Tuttle |
| 1997.03.02.11 |
Loose Tuning Pins, from Bruce Clark |
| 1997.03.02.10 |
Loose Tuning Pins, from Charles Flaum |
| 1997.03.02.09 |
Loose Tuning Pins, from Brett Mohr |
| 1997.03.01.11 |
Loose Tuning Pins, from Craig Brougher |
| 1997.03.01.10 |
Loose Tuning Pins, from Peter Neilson |
| 1997.02.28.12 |
Loose Tuning Pins, from Charles Flaum |
| 1997.02.27.12 |
Loose Tuning Pins, from Tom Steuer |
| 1997.02.26.14 |
Loose Tuning Pins, from Troy Taylor |
| 1996.12.03.16 |
Oversize Pins and Mandolin Bars, from Damon Atchison |
| 1996.11.20.16 |
Bridge Pins Again, from Jon Page |
| 1996.11.18.05 |
Bridge Pins Again, from Larry Mayo |
| 1996.11.17.05 |
Re: 7/8 Inch Bridge Pins, from Jon Page |
| 1996.11.16.07 |
Where Can I Buy 7/8 Inch Bridge Pins?, from Larry Mayo |
| 1996.11.09.07 |
Epoxied Bridge Pins, from Craig Brougher |
| 1996.11.07.12 |
Bridge Pins, from Richard Moody |
| 1996.11.05.11 |
Bridge Pins, from Larry Mayo |
|
