| Digest Nr | Subject and Author |
|---|
 |
| 2025.07.05.03 | Audio-To-MIDI Transcriptions For Making Piano Rolls, from Piotr Barcz |
| 2024.01.25.02 | Making Wurlitzer Unit Valves, from Wallace Venable |
| 2024.01.24.03 | Making Wurlitzer Unit Valves, from Jeff Kunkel |
| 2021.03.25.05 | FS: Tools for Making Barrels for Barrel Organs, from Anatoly Zayaruzny |
| 2021.03.25.01 | Video: The Making of the Seabreeze Carousel, from Matthew Caulfield |
| 2021.03.24.01 | Video: The Making of the Seabreeze Carousel, from Andrew Lardieri |
| 2020.12.26.03 | Making Wurlitzer Unit Valves, from Don Teach |
| 2020.08.13.03 | Making Chime Rods, from Karl Schröder |
| 2020.08.11.03 | Making Chime Rods For Chiming Clocks, from Mark Kinsler |
| 2019.10.28.03 | Making Wurlitzer Band Organs Play Caliola Rolls, from Matthew Caulfield |
| 2019.10.28.02 | Making Wurlitzer Band Organs Play Caliola Rolls, from Glenn Thomas |
| 2019.10.26.03 | Making Wurlitzer Band Organs Play Caliola Rolls, from Matthew Caulfield |
| 2018.05.31.04 | Paper For Making Player Piano Rolls, from Don Teach |
| 2018.05.27.02 | Paper For Making Player Piano Rolls, from John Chaplain |
| 2018.04.26.08 | Making a 26 Point Sprocket, from John A. Tuttle |
| 2018.04.25.05 | Making a 26 Point Sprocket, from Robbie Rhodes |
| 2018.04.25.04 | Making a 26 Point Sprocket, from Craig Smith |
| 2018.04.24.05 | Making a 26 Point Sprocket, from Dave Krall |
| 2018.03.12.02 | Making Small Bushing Bearings, from Don Teach |
| 2017.11.03.05 | Making Wurlitzer Pouch Rings, from Thomas Binnall |
| 2017.11.02.07 | Making Wurlitzer Pouch Rings, from Bill Klinger |
| 2017.11.01.04 | Making Wurlitzer Pouch Rings, from Bill Klinger |
| 2017.03.01.04 | Making Pouch Rings For Preformed Pouches, from Spencer Chase |
| 2017.02.28.05 | Making Pouch Rings For Preformed Pouches, from John Grant |
| 2017.02.26.06 | Making Pouch Rings For Preformed Pouches, from Grant Chapman, NY |
| 2017.02.24.07 | Making Pouch Rings For Preformed Pouches, from Gordon Ramsey |
| 2017.02.22.09 | Making Paper Rings, Washers and Discs, from John Grant |
| 2017.02.22.08 | Making Paper Rings, Washers and Discs, from Spencer Chase |
| 2017.02.22.07 | Making Paper Rings, Washers and Discs, from Gordon Stelter |
| 2017.02.21.04 | Making Paper Rings, Washers and Discs, from Gordon Ramsey |
| 2017.01.31.01 | Music Box Making TV Show on 3 February 2017, from Jonathan Herz |
| 2016.08.09.01 | Making Style 125 Music Rolls From Scratch, from Harald M. Mueller |
| 2016.08.08.02 | Making Style 125 Music Rolls From Scratch, from Jeff Bridges |
| 2016.06.08.02 | Making a Musical Box Tune Sheet, from Karl Petersen |
| 2014.12.22.01 | Making Piano Roll Pull Tabs & D-rings, from John Phillips |
| 2014.11.17.08 | Making a Governor Tempo Aperture Plate, from Norman Cantrell |
| 2014.09.07.03 | Making Brass Tubing Elbows, from Ed Gloeggler |
| 2014.09.05.07 | Making Brass Tubing Elbows, from John A. Tuttle |
| 2014.09.03.03 | Making Brass Tubing Elbows, from John A. Tuttle |
| 2014.07.18.06 | Making Blotter Paper Gaskets, from Don Teach |
| 2014.06.17.05 | Making Pouch Rings for Universal Player Action, from John A. Tuttle |
| 2014.05.10.06 | Making Brass Hose Elbows, from D. L. Bullock |
| 2014.05.09.06 | Making Brass Hose Elbows, from Don Teach |
| 2014.05.09.05 | Making Brass Hose Elbows, from Pat DeWitt |
| 2014.05.08.02 | Making Brass Hose Elbows, from Roger Wiegand |
| 2014.01.23.07 | Making Wurlitzer APP Rolls, from Thomas Jansen |
| 2014.01.18.03 | Making Wurlitzer APP Rolls, from David O'Connor |
| 2013.09.29.01 | Making a Grand Piano Belly Cloth, from Gordon Stelter |
| 2013.09.26.03 | Making a Grand Piano Belly Cloth, from Terry Smythe |
| 2013.03.07.03 | Steel for Making a Musical Movement Comb, from Jonathan Herz |
| 2013.03.07.02 | Steel for Making a Musical Movement Comb, from Paul Eatherington |
| 2013.03.05.03 | Steel for Making a Musical Movement Comb, from Michael E Schaffter |
| 2012.08.15.03 | Making a Roll Chuck for 65/88-note Pianola, from Jeffrey R. Wood |
| 2012.08.08.01 | Making Piano Roll Labels Using Corel Draw, from Bill Budenholzer |
| 2012.02.03.03 | Music Roll Slips While Making Player Piano Video, from Bob Taylor |
| 2012.01.04.01 | Making Stained Glass Windows in Omaha, from Bobby Kent |
| 2011.12.29.05 | Making Flanges for 65-note Music Roll Spools, from Greg Filardo |
| 2011.10.15.06 | Making Player Piano Gaskets in Paper and Felt, from Robert Kissick |
| 2011.10.01.01 | Making Automata Figures to Match the Motions, from Robbie Rhodes |
| 2011.09.29.01 | Making Automata Figures to Match the Motions, from Jeff Vincent |
| 2011.08.05.13 | Making Burnt Shellac, from Mark Ritzenhein |
| 2011.08.03.16 | Making Burnt Shellac, from Matthew Caulfield |
| 2011.04.01.03 | Making Coinola Xylophone Repeating Pneumatics, from Don Teach |
| 2011.01.18.04 | Making Solenoid Valves for MIDI Player Piano, from Philippe Cichon |
| 2010.07.21.02 | Making a New Gasket for the Rolmonica, from Spencer Chase |
| 2010.07.01.02 | Making Coinola Pump Springs, from Wade Newton |
| 2010.05.24.03 | Making a New Spring Motor for Singing Bird Cage, from Don Caine |
| 2010.05.22.02 | Making a New Spring Motor for Singing Bird Cage, from Keith Merchant |
| 2010.05.04.12 | Making Elbows of Thin Wall Brass Tubing, from Spencer Chase |
| 2010.04.01.02 | Making a Wurlitzer Wonderlight, from Nicholas Newble |
| 2010.03.31.01 | Making MIDI-controlled Musical Instruments, from Jay Caughron |
| 2010.03.27.01 | Making MIDI-controlled Musical Instruments, from John Smith |
| 2010.03.25.07 | Steel for Making a Musical Movement Comb, from Nicholas Simons |
| 2010.03.25.06 | Steel for Making a Musical Movement Comb, from Nancy Fratti |
| 2010.03.24.03 | Steel for Making a Musical Movement Comb, from Bernt Damm |
| 2010.01.13.07 | Making Simple Decals, from Mike Schoeppner |
| 2010.01.12.03 | Making Simple Decals, from Wallace Venable |
| 2010.01.07.03 | Making an Organ Crankshaft, from Matthew Caulfield |
| 2010.01.07.02 | Making an Organ Crankshaft, from Bob Loesch |
| 2009.08.18.04 | Making Wurlitzer Unit Valves, from Robert Loeffler |
| 2009.07.11.04 | Making Brass Flat Wire for Organ Barrel Pins, from Duaine Hechler |
| 2009.07.11.03 | Making Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.06.12.05 | Making Wurlitzer Unit Valves, from Don Teach |
| 2009.05.13.04 | Making a Mechanical Musical Doorbell, from Andy LaTorre |
| 2009.05.11.06 | Making Secondary Valve Pouches, from Pat DeWitt |
| 2009.05.11.03 | Making Mechanical Musical Doorbell, from Al Sefl |
| 2009.05.10.04 | Making Mechanical Musical Doorbell, from Ted Baumgart |
| 2009.05.02.04 | Making Brass Reducing Nipples, from Spencer Chase |
| 2009.01.30.02 | Making an Endless Screw for a Musical Box, from Fred Longrigg |
| 2007.11.26.01 | Making Videos of Mechanical Music Instruments, from Mark Kinsler |
| 2007.09.17.10 | Making Roll Boxes, from John Phillips |
| 2007.09.17.09 | Making Roll Boxes, from Gregory Filardo |
| 2007.09.01.05 | Making Wurlitzer Unit Valve Blocks, from Matthew Caulfield |
| 2007.09.01.04 | Making Wurlitzer Unit Valve Blocks, from Don Teach |
| 2007.09.01.03 | Making Wurlitzer Unit Valve Blocks, from Robert Loeffler |
| 2007.08.31.08 | Making Wurlitzer Unit Valve Blocks, from Howard Jensen |
| 2007.04.20.03 | Star Perforator for Making Perforated Music Rolls, from Paul Manganaro |
| 2007.02.17.06 | Making Wurlitzer Unit Valves, from Bob Humes |
| 2007.02.05.06 | Making Trumpet Pipes With Free Reeds, from John Nolte |
| 2007.02.05.05 | Making Trumpet Pipes With Free Reeds, from Nigel Perry |
| 2007.02.05.04 | Making Trumpet Pipes With Free Reeds, from Wallace Venable |
| 2007.02.04.08 | Making Trumpet Pipes With Free Reeds, from Dale Gunnar |
| 2007.02.04.07 | Making Trumpet Pipes With Free Reeds, from Craig Smith |
| 2007.02.04.06 | Making Trumpet Pipes With Free Reeds, from Gary Stevenson |
| 2007.02.04.05 | Making Trumpet Pipes With Free Reeds, from Nicholas Simons |
| 2007.02.03.02 | Making Trumpet Pipes, from Nigel Perry |
| 2007.01.23.09 | Making Wurlitzer 105 Unit Valves, from Don Teach |
| 2007.01.21.06 | Making Wurlitzer 105 Unit Valves, from John Haass |
| 2006.05.04.09 | Making Piano Roll from MIDI File, from Phillip Pardue |
| 2005.12.15.02 | Who Is Making Piano Rolls?, from Randy Hammond |
| 2005.12.14.03 | Who Is Making Piano Rolls?, from Don Teach |
| 2005.12.13.06 | Who Is Making Piano Rolls?, from Douglas Henderson |
| 2005.12.13.05 | Who Is Making Piano Rolls?, from Bruce Grimes |
| 2005.12.13.04 | Who Is Making Piano Rolls?, from Don Teach |
| 2005.12.13.03 | Who Is Making Piano Rolls?, from Gerhard Dangel |
| 2005.12.12.01 | Who Is Making Piano Rolls?, from Ed Chaban |
| 2005.09.20.08 | Hide Glue in Guitar Making, from Tommy Forney |
| 2004.11.20.02 | Making a Musical Box Movement, from Marcus Ritson |
| 2004.04.23.01 | Making Fake Antiques, from Patty Slayton |
| 2003.10.18.02 | Making Money Selling Player Piano Rolls, from Roger Waring |
| 2003.10.17.01 | Making Money Selling Player Piano Rolls, from Larry Wilson |
| 2003.06.04.18 | Making a New Bottom Board for an Upright Piano, from David Vanderhoofven |
| 2003.01.24.01 | QRS Quits Making Pianocorder Cassettes, from Bob Baker |
| 2002.06.16.05 | Making Musical Boxes From Scratch, from Jonathan Herz |
| 2002.06.06.07 | Making a Musical Box, from Mark Kinsler |
| 2002.06.06.06 | Making A Musical Box, from Craig Smith |
| 2002.04.18.11 | Making Brass Trumpet Pipes, from Bob Essex |
| 2001.07.24.02 | Making Piano Roll from MIDI File, from Bob Lang |
| 2001.07.24.01 | Making Piano Roll from MIDI File, from John Farrell |
| 2001.07.23.04 | Making Piano Roll from MIDI File, from Jon Miller |
| 2001.05.28.05 | Making Torsion Springs for Organ Bellows, from Philip Jamison |
| 2001.03.05.01 | Seek Help Making Organ Pipes, from Marc Elbasani |
| 2001.02.24.04 | Making Steel for Piano Strings, from Richard Vance |
| 2000.09.04.07 | Making Music Boxes, from Kim Kelchner |
| 2000.06.13.05 | Making Transfer Decals, from Craig Smith |
| 2000.05.18.07 | Making a Rotary Bellows Pump, from Miguel de Mattos |
| 2000.05.07.06 | Paper Needed for Roll Making, from Don Teach |
| 2000.04.17.11 | Making a Belly Cloth for a Reproducing Grand, from Randolph Herr |
| 2000.03.01.03 | Book " Making More Wooden Mechanical Models", from Joyce Brite |
| 2000.02.18.10 | Making Name Plates By Acid Etching, from Jeffrey Borinsky |
| 2000.02.18.09 | Making Name Plates By Acid Etching, from Craig Smith |
| 2000.02.17.09 | Making Name Plates By Acid Etching, from Don Teach |
| 2000.02.17.05 | Making "Fantasia 2000" & Thanks to MMD, from Rich Marschner |
| 2000.01.16.10 | Making a Wire Knot in a Piano String, from Jon Page |
| 2000.01.15.08 | Making a Wire Knot in a Piano String, from John A. Tuttle |
| 2000.01.14.07 | Making Wound Bass Strings for the Piano, from John A. Tuttle |
| 2000.01.11.20 | Making Wound Bass Strings for the Piano, from Bill Mintz |
| 2000.01.09.06 | Making Wound Bass Strings for the Piano, from Carl Meyer |
| 1999.12.23.01 | Cost of Making Book Music, from Tom Meijer |
| 1999.10.25.12 | Making Big Wood Screws, from Peter Edmonds |
| 1999.09.06.14 | Making Bass Drum for Band Organ, from Dave Vincent |
| 1999.06.05.04 | Mold Making Techniques, from Don Teach |
| 1999.05.09.08 | Making the "Killer" Duo-Art Test Roll, from Tim Baxter |
| 1999.05.02.03 | Books "Peepshows" & " Making Musical Instruments", from Joyce Brite |
| 1999.04.14.10 | Making CDs of Old Phono Recordings, from Bob Loesch |
| 1999.03.27.06 | Website About Making Organ Pipes, from John Kleinbauer |
| 1998.12.17.11 | Arranging and Making Book Music, from Hans van Oost |
| 1998.12.17.10 | Arranging and Making Book Music, from Ingmar Krause |
| 1998.12.16.07 | Arranging and Making Book Music, from Matthew Caulfield |
| 1998.11.29.07 | Making Chime Tubes, from Andy LaTorre |
| 1998.10.17.06 | Making The "Killer" Duo-Art Test Roll, from Karl Ellison |
| 1998.10.17.05 | Making the "Killer" Duo-Art Test Roll, from Julian Dyer |
| 1998.10.13.03 | Making the "Killer" Duo-Art Test Roll, from Bernt Damm |
| 1998.10.12.08 | Making the "Killer" Duo-Art Test Roll, from Tim Baxter |
| 1998.09.25.10 | Need Help Making a Music Box, from Larry Greenfield |
| 1998.09.25.09 | Need Help Making a Music Box, from Larry Smith |
| 1998.09.24.07 | Need Help Making a Music Box, from Kory Gunnerson |
| 1998.08.28.15 | Making Cactus Phonograph Needles, from Bill Finch |
| 1998.08.27.12 | Making Fiber Phonograph Needles, from Bruce Clark |
| 1998.07.09.10 | Making of "Ragtime - the Musical", from Mike Ryan |
| 1998.01.15.03 | Making Acoustic Recordings of Music Boxes, from Don Cox |
| 1998.01.14.01 | Making Acoustic Recordings of Music Boxes, from Beatrice Robertson |
| 1998.01.13.06 | Making Audio Recordings of a Piano, from pianodoctor@mindspring.com |
| 1997.12.02.06 | Making Music Box Cylinders and Discs, from Keith Merchant |
| 1997.11.05.11 | Making Mahogany Wood Stain, from John Johns |
| 1997.09.28.06 | Making Pneumatics, from Bruce Clark |
| 1997.09.28.05 | Making a Wurlitzer 125 Tracker Bar (pt. 2), from Matthew Caulfield |
| 1997.09.27.09 | Making a Wurlitzer 125 Tracker Bar, from Don Teach |
| 1997.09.27.08 | Making a Wurlitzer 125 Tracker Bar, from Matthew Caulfield |
| 1997.09.27.07 | Making a Wurlitzer 125 Tracker Bar, from Gary Rasmussen |
| 1997.09.26.12 | Making Pneumatics, from Damon Atchison |
| 1997.09.26.11 | Making a Tracker Bar, from Damon Atchison |
| 1997.09.17.14 | Essay: Making and Using Mad Rolls, from Hal Davis |
| 1997.09.05.05 | Making Brass Escutcheons, from Don Teach |
| 1997.09.04.02 | Making Brass Escutcheons and Pins, from Bob Conant |
| 1997.01.02.08 | Making Homebrew Burnt Shellac, from Douglas K. Rhodes |
| 1995.08.21.07 | Making Music Boxes in Switzerland, from Bob Ebert |
| 1995.08.11.01 | Re: Making new music box cylinders, from Robbie Rhodes |
| 1995.08.10.05 | Re: Making new music box cylinders, from Will Dahlgren |
| 1995.08.10.02 | Re: Making new music box cylinders, from Larry Smith |
| 1995.08.09.03 | Re: Making new music box cylinders, from Peter Smakula |
| 1995.08.09.02 | Re: Making new music box cylinders, from Larry Smith |
| 1995.08.09.01 | Re: Making new music box cylinders, from Larry Smith |
| 1995.08.08.03 | Re: Making Music Box Cylinders, from Robbie Rhodes |
| 1995.08.08.02 | RE: Making new music box cylinders, from Will Dahlgren |
| 1995.08.07.03 | Re: Newsgroup or Listgroup and Re: Making Music Box Cylinders and Seeking Collections and Museums to Visit, from Larry Smith |
| 1995.08.05.01 | Re: Making New Music Box Cylinders, from Robbie Rhodes |
| 1995.08.03.03 | Making New Music Box Cylinders, from Larry Smith |
| 1995.06.17.03 | Restoring Old Rolls and Making New Ones, from Robbie Rhodes |
|
