| Digest Nr | Subject and Author |
|---|
 |
| 2026.01.06.01 | FS: Brass Coin Chutes, from Don Teach |
| 2025.02.02.03 | Seek Telektra 88-note Brass Piano Rolls, from David Krall |
| 2023.12.16.01 | Ragtime Pianist Hughe Woolford on Telektra Brass, from William Jacobson |
| 2023.12.07.01 | Ragtime Pianist Hughe Woolford on Telektra Brass, from David Krall |
| 2022.04.20.02 | Brass 'Art Deco' Ornaments for an Ampico Piano, from Mike Walter |
| 2021.09.14.02 | Replacement Brass Reeds for Pinned Cylinder Organ, from John Bartlett |
| 2021.09.10.01 | Replacement Brass Reeds for Pinned Cylinder Organ, from Roger Wiegand |
| 2021.01.01.03 | Seek 5/32" Brass Elbows, from John Ravert, Sr. |
| 2020.11.30.01 | Seek 4-holes Tracking System Brass Tracker Bar, from Dave Krall |
| 2020.11.24.03 | Seek 5/8" Formed & Bent Brass Tubing Elbows, from Dave Krall |
| 2020.09.24.04 | Seek Brass Tubing Elbows 1/4" O.D., from Brian Thornton |
| 2020.07.30.03 | Seek Brass Medallions For Bruder Barrel Organ, from Craig Smith |
| 2020.07.28.01 | Seek Brass Medallions For Bruder Barrel Organ, from Craig Smith |
| 2020.02.22.06 | Seek 7" Telektra Brass Piano Rolls, from Dave Krall |
| 2019.12.02.02 | Seek 88-note Telektra Brass Roll Player Console, from Dave Krall |
| 2019.09.17.03 | FS: Welte Vorsetzer Souvenir of Inlaid Brass, from Dave Krall |
| 2019.05.18.02 | Treating Corrosion On Brass Tracker Bar Nipples, from Steven Reed |
| 2019.05.16.05 | Treating Corrosion On Brass Tracker Bar Nipples, from Gordon Ramsey |
| 2018.10.23.01 | FS: North Tonawanda 155 Brass Trumpet Band Organ, from Shawn Quigley |
| 2018.10.12.01 | Seek Small Brass Gear for Ampico A Transmission, from Steve Dibble |
| 2018.08.13.05 | Lubricating Telektra Brass Music Rolls, from Dave Krall |
| 2018.08.12.02 | Lubricating Telektra Brass Music Rolls, from Brian Shaw |
| 2018.08.10.05 | Lubricating Telektra Brass Music Rolls, from Mark Kinsler |
| 2018.08.07.04 | Lubricating Telektra Brass Music Rolls, from Dave Krall |
| 2018.07.24.11 | FS: Brass Bleed Cups, from Gordon Ramsey |
| 2018.07.23.04 | Seek Brass Bleed Cups, from Gary Stevenson |
| 2018.07.22.03 | Brass Bleed Cups, from Thomas Binnall |
| 2018.07.20.07 | Seek Brass Bleed Cups, from Thomas Binnall |
| 2018.06.08.05 | FS Free: Brass Reeds, from Thomas Binnall |
| 2018.06.06.03 | FS: Brass Reeds for 58-note Aeolian Orchestrelle, from Kevin McElhone |
| 2018.05.19.01 | Seek Brass Trumpets & Trombones For Band Organ, from Galen Bird |
| 2017.06.14.05 | Brass Tubing For Player Pianos, from John Ross |
| 2017.03.01.05 | Seek Telektra 88-note Brass Music Rolls, from Ron Schmuck |
| 2016.09.12.01 | FS: Brass Tracker Bar Tubing, from Bill Sharkey |
| 2016.07.29.01 | Source of Reproduction Brass Nameplates, from Chris Kocsis |
| 2016.07.27.06 | Seek Brass Nameplate Reproduction, from Fred Dahlinger |
| 2016.06.22.13 | FS: Brass Bleed Cups, from Gordon Ramsey |
| 2016.04.08.04 | Seek Brass Bleed Cups, from John Ravert, Sr. |
| 2016.04.03.06 | Cracks in Calliope Brass Pipes, from Dave Vincent |
| 2016.04.01.02 | Cracks in Calliope Brass Pipes, from Brian Thornton |
| 2015.10.30.05 | Unknown Brass Tool, from Debbie Legg |
| 2015.10.30.04 | Unknown Brass Tool, from Terry Kirwin |
| 2015.10.30.03 | Unknown Brass Tool, from John Grant |
| 2015.10.30.02 | Unknown Brass Tool Photos, from John A. Tuttle |
| 2015.10.28.02 | Seek 5/16" Brass Elbows, from Walt Gerber |
| 2015.10.28.01 | Unknown Brass Tool, from John Grant |
| 2015.10.27.10 | Unknown Brass Tool, from Dell Urry |
| 2015.10.24.12 | Unknown Brass Tool, from John A. Tuttle |
| 2015.10.24.11 | Unknown Brass Tool, from Jurgen Goering |
| 2015.10.24.10 | Unknown Brass Tool, from John Grant |
| 2015.10.24.09 | Unknown Brass Tool, from Ferdinand Pointer |
| 2015.10.24.08 | Unknown Brass Tool, from Stephen Powell |
| 2015.10.21.04 | Unknown Brass Tool, from John A. Tuttle |
| 2015.10.03.01 | Refinishing Antique Brass, from Karl Schroeder |
| 2015.10.01.05 | Refinishing Antique Brass, from Bruce Clark |
| 2015.09.30.07 | Refinishing Antique Brass and Bronze, from Grant Chapman, NY |
| 2015.09.30.06 | Polishing Brass, from Craig Smith |
| 2015.08.02.04 | Seek Small Brass Decorative Metal Stampings, from Craig Smith |
| 2015.06.18.01 | Kimball Brass Damper Plates With Spring, from David Dewey |
| 2015.06.16.02 | Kimball Brass Damper Plates With Spring, from Don Teach |
| 2015.06.15.06 | Kimball Brass Damper Plates With Spring, from John Dewey |
| 2015.06.12.05 | Seek Kimball Brass Damper Plates With Spring, from David Dewey |
| 2015.04.18.06 | Seek Brass Soft Pedal for "Sting" Player Piano, from Larry Schuette |
| 2015.02.22.04 | Popcorn & Bees in Brass Trumpet Organs, from Gilles Chouinard |
| 2015.02.21.02 | Popcorn & Bees in Brass Trumpet Organs, from David Dewey |
| 2015.02.20.03 | Popcorn & Bees in Brass Trumpet Organs, from Gilles Chouinard |
| 2015.02.20.02 | Voicing Gavioli Brass Saxophone Pipes, from D. L. Bullock |
| 2015.02.19.01 | Popcorn & Bees in Brass Trumpet Organs, from Ken Vinen |
| 2015.02.18.01 | Popcorn & Bees in Brass Trumpet Organs, from Andy Park |
| 2014.11.25.08 | FS: Brass Force-fit Collars for Player Valves, from John A. Tuttle |
| 2014.09.07.03 | Making Brass Tubing Elbows, from Ed Gloeggler |
| 2014.09.05.07 | Making Brass Tubing Elbows, from John A. Tuttle |
| 2014.09.03.03 | Making Brass Tubing Elbows, from John A. Tuttle |
| 2014.08.20.03 | FS: Brass Trumpets for Wurlitzer 125 or 150, from Jon Guy |
| 2014.05.10.06 | Making Brass Hose Elbows, from D. L. Bullock |
| 2014.05.10.05 | Forming Brass Elbows Using Wood's Metal, from Peter Smyth |
| 2014.05.09.06 | Making Brass Hose Elbows, from Don Teach |
| 2014.05.09.05 | Making Brass Hose Elbows, from Pat DeWitt |
| 2014.05.09.04 | Copper vs. Brass Hose Elbows, from Nick Seymour |
| 2014.05.08.03 | Seek Brass Hose Elbows, from Jon Page |
| 2014.05.08.02 | Making Brass Hose Elbows, from Roger Wiegand |
| 2014.05.08.01 | Source of Small Brass Tubing Elbows, from Jim Crank |
| 2014.05.06.03 | Seek PPCo Brass Hose Elbows, from Jon Page |
| 2013.11.12.02 | Seek Brass Name Plates for Photoplayers, from James Williams |
| 2013.10.07.01 | Seek Brass Locking Nut for Symphonion Manivelle, from Richard Mazur |
| 2013.04.10.06 | Seek Brass Medallions for Seeburg G, from Thomas Larsen |
| 2013.03.27.06 | Seek Ampico Tracker Bar Brass Screw Cover, from Jonathan Holmes |
| 2013.03.17.02 | Seek Small Brass Gear for Ampico Transmission, from Eliyahu Shahar |
| 2013.02.26.10 | Installing Brass Tubing in Ampico Drawer, from Ray Bauer |
| 2013.02.25.05 | Installing Brass Tubing in Ampico Drawer, from Bill Chapman |
| 2013.01.11.05 | Seek Brass Trombones for Wurlitzer Band Organ, from Joe Hilferty |
| 2012.10.08.08 | Doyle Lane Reed Brass, Shallots, and Freins, from Terry Younce |
| 2012.10.07.04 | Reed Brass Specifications, from George Cooper |
| 2012.10.07.03 | Reed Brass Specifications, from William McKeown |
| 2012.10.05.03 | Reed Brass Specifications, from Wallace Venable |
| 2012.10.04.01 | Reed Brass Specifications Needed, from Doug Nixon |
| 2012.08.31.05 | Wurlitzer 165 Heard on "Catch The Brass Ring", from Matthew Caulfield |
| 2012.08.29.03 | Wurlitzer 165 Heard on "Catch The Brass Ring", from Jim Neher |
| 2012.08.25.04 | Wurlitzer 165 Heard on "Catch The Brass Ring", from Dan Robinson |
| 2012.08.24.04 | Wurlitzer 165 Heard on "Catch The Brass Ring", from David Haibach |
| 2012.05.19.01 | Replicating Antique Etched Brass Plates, from Konstantyn Knyazev |
| 2012.03.08.09 | Brass Plating Service, from Pat DeWitt |
| 2012.03.08.08 | Brass Plating Service, from Randy Hayno |
| 2012.03.07.09 | Seek Low-cost Brass Plating Service, from Dave Krall |
| 2012.01.12.03 | Unknown Brass Cylinder Music Box Plays 32 Reeds, from Matthew Caulfield |
| 2012.01.12.02 | Unknown Brass Cylinder Music Box Plays 32 Reeds, from Nancy Fratti |
| 2012.01.11.02 | Unknown Brass Cylinder Music Box Plays 32 Reeds, from Brian Chesters |
| 2012.01.11.01 | Unknown Brass Cylinder Music Box Plays 32 Reeds, from Matthew Caulfield |
| 2012.01.10.01 | Unknown Brass Cylinder Music Box Plays 32 Reeds, from Fredy Gerer |
| 2011.11.23.03 | Brass Plate With Raised Lettering, from John Rutoskey |
| 2011.11.21.06 | Seek Brass Plate With Raised Lettering, from Jeff Adkins |
| 2011.06.16.08 | Brass Pressure Bar for Barrel Piano, from Craig Smith |
| 2011.06.16.07 | Brass Pressure Bar for Barrel Piano, from Jan Kijlstra |
| 2011.06.15.04 | Seek Brass Pressure Bar for Barrel Piano, from Paul Baker |
| 2011.03.18.01 | Etched Brass Name Plate for Regina Musical Box, from Craig Smith |
| 2011.03.17.10 | Seek Nelson-Wiggen Brass Name Plate, from Paul Manganaro |
| 2011.02.07.05 | FS: Brass Violin Pipe Freins, from Bruce Newman |
| 2011.02.07.04 | Source of Brass Freins, from Cecil Dover |
| 2011.02.06.09 | FS: Brass Freins, from Bill Klinger |
| 2011.01.14.09 | Seek Brass Control Levers for Player Piano, from Kevin Way |
| 2011.01.11.06 | Removing Dents and Plating Sheet Brass, from Tom Rosenbusch |
| 2011.01.10.04 | Removing Dents and Plating Sheet Brass, from Don Teach |
| 2011.01.10.03 | Removing Dents and Plating Sheet Brass, from David Anderson |
| 2011.01.09.01 | Removing Dents and Plating Sheet Brass, from Robbie Rhodes |
| 2010.05.04.12 | Making Elbows of Thin Wall Brass Tubing, from Spencer Chase |
| 2010.05.03.08 | Seek 3/8" O.D. Thin Wall Brass Elbows, from Roger Wiegand |
| 2010.03.03.07 | FS: Set of Brass Calliope Pipes, from Don Hattendorf |
| 2009.12.14.07 | Seek Brass Ferrules for 6-leg Ampico Grand, from Charlie Wasson |
| 2009.11.25.09 | Repairing a Brass Tracker Bar, from Michael Gordon |
| 2009.07.11.04 | Making Brass Flat Wire for Organ Barrel Pins, from Duaine Hechler |
| 2009.07.11.03 | Making Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.07.10.02 | Brass Flat Wire for Organ Barrel Pins, from David Evans |
| 2009.07.08.03 | Brass Flat Wire for Organ Barrel Pins, from Spencer Chase |
| 2009.07.07.01 | Brass Flat Wire for Organ Barrel Pins, from Derek Deane |
| 2009.07.06.02 | Brass Flat Wire for Organ Barrel Pins, from Craig Smith |
| 2009.07.04.02 | Seek Brass Flat Wire for Organ Barrel Pins, from Serge Robillard |
| 2009.05.20.07 | Repairing Brass Trumpet Organ Pipes, from Kent Zacherl |
| 2009.05.04.05 | Salvage Brass Nipples from Tracker Bar, from Wade Newton |
| 2009.05.03.05 | Salvage Brass Nipples from Tracker Bar, from Alan Erb |
| 2009.05.03.04 | Source of Brass Tubing, from Kary Barnett |
| 2009.05.02.07 | Source of Brass Tubing, from David Evans |
| 2009.05.02.06 | Source of Brass Tubing, from Stanley Harrison |
| 2009.05.02.05 | Source of Brass Tubing, from Joe Sloane |
| 2009.05.02.04 | Making Brass Reducing Nipples, from Spencer Chase |
| 2009.05.01.02 | Seek Source of Brass Tubing, from Don Teach |
| 2009.04.20.04 | Seek Top Brass Plate for Seeburg K, from Al Menashe |
| 2009.04.11.01 | Wurlitzer Style 148 Band Organ Brass Pipes, from Bill Klinger |
| 2009.01.13.04 | Wurlitzer Tracker Bar of Solid Brass, from Christian Wittmann |
| 2009.01.06.07 | Brass Nipples and Airmotor Found, from Gary Stevenson |
| 2009.01.01.09 | Seek Brass Nipples and Airmotor, from Gary Stevenson |
| 2008.11.16.05 | Seek Brass Action Rails For Cable Player, from Marc Sachnoff |
| 2008.07.05.01 | FS: Rank of Brass Calliope Pipes, from Mike Knudsen |
| 2008.07.04.07 | FS: Rank of 43 Brass Calliope Pipes, from Mike Knudsen |
| 2008.07.01.05 | FS: Rank of 43 Brass Calliope Pipes, from Mike Knudsen |
| 2008.06.28.03 | Telelectric Brass Roll Piano Player System, from Ross Schacher |
| 2008.06.26.02 | Seek Tel-Electric Co. Brass Roll Player Piano, from Dana Minkler |
| 2008.06.20.05 | FS: Rank of 44 Brass Calliope Pipes, from Mike Knudsen |
| 2008.06.18.06 | FS: Brass Trumpet Pipes, from Jon Guy |
| 2008.04.24.04 | Seek Brass Frame for Exhauster Pedals, from Nick Yengle |
| 2008.03.28.05 | FS: Brass Trumpet Resonators & Clarinet Cones, from Bill Klinger |
| 2008.03.23.03 | Seek Original Wurlitzer Brass Trumpet Pipes, from Marty Roenigk |
| 2007.07.05.05 | "Double in Brass", from Ed Hattrup |
| 2007.06.04.05 | Seek Miniature Brass Extension Springs, from Thomas Chatterton |
| 2007.05.17.08 | Aluminum, Brass & Cast Iron Foundry in Minnesota, from John A. Tuttle |
| 2007.05.07.03 | Seek Brass 3-port Rotary Valve, from Jeff Bridges |
| 2007.02.27.05 | Source of Brass Tubing for Calliope Pipes, from Bob Yorburg |
| 2007.02.26.05 | Source of Brass Tubing for Calliope Pipes, from Greg Filardo |
| 2007.01.20.02 | Locating Sheet Brass, from Glen R. Perye Jr. |
| 2006.11.28.02 | Seek Brass Plaques from Orchestrions & Nickelodeons, from Kenneth Goldman |
| 2006.11.12.02 | Repairing Broken Brass Tubing, from Joel Gauthier |
| 2006.11.04.02 | Seek Brass Tag for Western Electric Derby, from Elliot Baratz |
| 2006.08.29.06 | Source of Brass Spring Wire, from Marvin Zeigler |
| 2006.08.19.04 | Seek Brass Spring Wire, from Mike Walter |
| 2006.07.18.02 | Brass Fittings for Musical Box Cases, from Renaissance Le Corbeau |
| 2006.07.18.01 | Replicating Hooks & Fasteners & Brass Fittings, from Frank Metzger |
| 2006.07.17.02 | Seek Brass Fittings for Musical Box Cases, from Noel Gale |
| 2006.03.24.07 | FS: Seeburg Brass Knobs, from Don Teach |
| 2006.03.23.04 | Plating Seeburg Brass Knobs, from Don Teach |
| 2005.08.07.02 | Seek Brass Plaques from Music Machines, from Kenneth Goldman |
| 2005.04.04.05 | Protective Lacquer for Brass and Metals, from Kim Bunker |
| 2005.04.03.03 | Protective Lacquer for Brass and Metals, from Conrad Bladey |
| 2005.04.02.04 | Protective Lacquer for Brass and Metals, from Bill Maguire |
| 2005.04.01.04 | Protective Lacquer for Brass and Metals, from Kim Bunker |
| 2005.03.04.08 | Seek Brass Labels for Wurlitzer Player Piano, from Lonnie Ragan |
| 2004.09.22.03 | Brass Polish, from Dean T. Smith |
| 2004.02.25.08 | Source of Brass Gears, from Colin Hinz |
| 2004.02.24.05 | Source of Brass Gears, from Hal Davis |
| 2004.01.24.04 | Casting Brass Rosette Washers, from Mark Kinsler |
| 2004.01.23.06 | Casting Brass Rosette Washers, from Craig Smith |
| 2004.01.22.01 | Seek Brass Rosette Washers for Comb Screws, from Phil Procter |
| 2003.12.05.07 | Seek Brass Sleeve for Hamilton Manualo Button, from Bob Claussen |
| 2003.11.13.06 | Seek Adhesive to Secure Brass Plate to Wood, from Bruce Clark |
| 2003.07.01.09 | FS: Telectric Brass Music Rolls, from Lynn Zillmer |
| 2003.06.19.02 | Polishing a Brass Music Box Cylinder, from Craig Smith |
| 2003.06.11.02 | Seek Brass Reed for Organette, from Michael Pawelek |
| 2003.06.09.04 | Seek Brass Horn Band Organs, from Les Beebe |
| 2003.06.02.05 | Value of Tel-Electric Brass Piano Rolls, from Bob Billings |
| 2003.06.01.02 | Value of "Telectric" Brass Roll Reader Console, from Bob Billings |
| 2003.05.30.08 | Value of "Telectric" Brass Roll Reader Unit, from Frank LaConte |
| 2003.03.17.06 | New Brass Freins and Pipe Tuning Slides, from Marc Elbasani |
| 2003.02.06.15 | Brass Tee Nipples, from Keith Taylor |
| 2003.02.05.09 | Source of Brass Tees, from Spencer Chase |
| 2003.02.02.04 | Seek Brass Tee Nipples, from Mike Knudsen |
| 2002.09.27.10 | Source of Flat Head Brass Screws, from Jon Page |
| 2002.09.26.09 | Source of Flat Head Brass Screws, from Herbert Huestis |
| 2002.08.22.06 | Ribbed Music Box Bedplate of Brass, from Mike Knudsen |
| 2002.07.01.09 | Small Hole Brass Bleed Cups, from Richard Vance |
| 2002.07.01.08 | Small Hole Brass Bleed Cups, from Craig Brougher |
| 2002.06.30.04 | Seek Small Hole Brass Bleed Cups, from Joyce Brite |
| 2002.04.18.11 | Making Brass Trumpet Pipes, from Bob Essex |
| 2001.11.19.08 | Cleaning Brass Calliope Whistles, from Ron Bopp |
| 2001.11.18.09 | Cleaning Brass Calliope Whistles, from Hal Davis |
| 2001.11.18.08 | Cleaning Brass Calliope Whistles, from Berley Firmin |
| 2001.11.16.02 | "Cleaning" Brass Calliope Pipes, from Dean Smith |
| 2001.09.28.01 | Wurlitzer Brass Pipes, from Matthew Caulfield |
| 2001.09.26.02 | Wurlitzer Brass Pipes, from Julie Porter |
| 2001.08.31.01 | Seek Brass Reed for Reed Organ, from Nick Yengle |
| 2001.08.21.08 | Source of Brass Reeds for Reed Organ, from Fritz Gellerman |
| 2001.08.21.07 | Source of Brass Reeds for Reed Organ, from Jon Page |
| 2001.08.20.01 | Seek Brass Reed for Reed Organ, from Nick Yengle |
| 2001.07.31.10 | Piano Tuning Pins Secured with Brass Wedges, from Donald Dusenbury |
| 2001.07.01.03 | Source of Cast Brass Sleigh Bells, from Tim Blyth |
| 2000.12.15.10 | Repairing Brass Hammer Flange Rail, from Bill Maxim |
| 2000.12.10.02 | Seek Brass Hammer Flange Rail For Knabe Upright, from Iran Ausley |
| 2000.11.07.14 | "Never-Dull" For Cleaning Brass Tracker Bar, from Bruce Clark |
| 2000.11.04.04 | Wurlitzer Caliola With Upside-Down Brass Pipes, from Jim Kenney |
| 2000.08.01.03 | Gem Organetta With Brass Music Roll, from Brian Chesters |
| 2000.08.01.02 | Gem Organetta With Brass Music Roll, from Ed Schmidt |
| 2000.07.31.01 | Gem Organetta With Brass Music Roll, from Brian Chesters |
| 2000.07.26.07 | Brass D-Rings for Music Roll Tabs, from Rob DeLand |
| 2000.07.20.07 | Brass D-Rings for Music Roll Tabs, from Bruce Clark |
| 2000.07.19.06 | Brass D-Rings for Music Roll Tabs, from Matthew Caulfield |
| 2000.07.18.06 | Brass D-Rings for Music Roll Tabs, from David Snelling |
| 2000.07.17.04 | Seek Brass D-Rings for Music Roll Tabs, from Nigel Perry |
| 1999.10.13.10 | Source of Brass Tubing, from Brian Smith |
| 1999.06.18.13 | Sanfilippo Band Organ with Brass Horns; Deagan Uniphone Bells, from Matthew Caulfield |
| 1999.05.27.05 | Seek Brass Valve Stem Rods, from Bob Loesch |
| 1999.05.26.07 | Seek Brass Valve Stem Rods, from Andy Struble |
| 1999.03.20.13 | FS: Brass Tubing for Calliope Pipes, from Jon Guy |
| 1998.09.25.06 | Removing Rubber Tube from Brass Nipples, from John Dewey |
| 1998.09.24.04 | Removing Rubber Tube from Brass Nipples, from Nigel Perry |
| 1998.06.15.19 | FS: Telelectric Brass Music Rolls, from Dave Hall |
| 1998.03.22.07 | Caliola with Brass Pipes, from Marty Roenigk |
| 1998.01.19.09 | Lacquer on Original Brass Tracker Bars, from Bruce Clark |
| 1997.12.14.16 | Polishing Brass, from Spencer Chase |
| 1997.12.13.07 | Shiny Brass Tracker Bars, from Bruce Clark |
| 1997.12.10.03 | New Resonator for Brass Trumpet Pipe, from Philip Jamison |
| 1997.12.03.11 | Cleaning Brass Escutcheon Plates, from Don Teach |
| 1997.12.02.10 | Restoring Brass Escutcheons, from Norman Narmore |
| 1997.09.05.05 | Making Brass Escutcheons, from Don Teach |
| 1997.09.04.02 | Making Brass Escutcheons and Pins, from Bob Conant |
| 1997.09.03.06 | Brass Escutcheons, from D. L. Bullock |
| 1997.06.14.04 | Source of Brass Tubing, from Dave Ingalls |
| 1997.01.17.14 | Source of Brass Trombones, from Robbie Rhodes |
| 1997.01.14.10 | Source of Brass Tubing, from Howard Kohlbrenner |
| 1997.01.07.09 | Source for Brass Tubing, from A. B. Bonds |
| 1996.12.31.05 | Re: Brass Tubing for Piccolo Pipes, from Bob and Sonja Lemon |
| 1996.12.30.09 | Re: Sealant For Lead Tubing and Brass, from Dave McNally |
| 1996.12.30.08 | Need Brass Tubing for Piccolo Pipes, from Howard Kohlbrenner |
| 1996.12.15.08 | Brass and Rubber Chemistry, from Frank Himpsl |
| 1996.09.12.08 | New Brass Lamps with Fringe for Orchestrions, from Rick Cooley |
| 1996.07.24.12 | WTB: Brass Trombone Pipes, from Marty Roenigk |
| 1995.12.21.04 | Brass Gear Wanted for Regina Music, from rashby@.interramp.com |
|
